Lowercrosssupport | ParaBody 880101 instruction

318X4

LOWERCROSSSUPPORT"

FIGURE 4

STEP4:

¯NOTEiIt may be necessa~" to loosen the 1/2 X 3-1/4" BOLTSof the LOWERCROSSSUPPORTconnecting to the IiPRIGI~IT FR.~%IEbefore beginnlngSTEP 4.

¯SECURELYassemble the STACKBASE(3) and the UPRIGHT(1) to the LOWERCROSSSUPPORTusing two 3/8 X 4" BOLTS(38). four 3/8" WASHERS(30), and two 3/8" LOWHEIGHTLOCKNUT5(29). See FIGURE

¯Pull back on the SPREgGPEg (21) and C.~REFULLYinsert the ADJ. FOOTSUPPORT(2) into the STACKBASE(3) as shox~'n FIGLrRE4.

¯Retighten the 1/2 X3-1/4" BOLTSloosened in the above STER

STEP5:

¯Sn.ap two Vc~IGHTPLATEBUSHEgGS(28) into the top of all twenty WEIGHTPLATES(40) as shown FIGURE5.