Screws.SeeFIGURE7, Support Step | ParaBody 880101 specs

FIGURE 7

;	3/8 X2-3/4"

SUPPORT

3/8 X4"

STEP 7:

¯NOTE:It may be necessary to loosen the 1/2 X 3-1/4" BOLTSof the UPPERCROSSSUPPORTconnecting the UPRIGHT FRA~IEbefore be~rming STEP7.

Insert two GUIDERODBUSI-I~GS(27) into the TOPBOOM(4) as sho~:n in HGURE Insert two 3 X 2" ENDCAPS(13) into the ends of the TOPBOOM(4). See FIGURE

Insert two 2" SQ. ENDCAPS(16) into the ends of the TOPBOOM(4). See FIGURE

Place TOPBOOM(4) over the GUIDERODS(6) and LOOSELYassemble the TOPBOOM(4) to the LrpRIGHT(1) using one 3/4" BOLT(32) and one 3/8" LOCKNUT(31) as shownin FIGURE

LOOSELYassemble the TOPBOOM(4) to the UPPERCROSSSUPPORTusing two 3/8 X 4" BOLTS(38), four 3/8" V,:-kS~ and two 3/8" LOCKNI51"S(31). See FIGURE

Slide the 13/16" SHAFTCOLLARS(15) to the top of the GUIDERODS(6) and SECURELYtighten the SHAFTCOLLA.R(15)

screws.SeeFIGURE7.

SECURELYtighten all connectionsmadeup to fl'tis point.