ParaBody 220 manual Step

Page 6

 

1

 

30 3/8 X 3-3/4

 

2

29

41

3

62

 

 

34

 

34

FIGURE 1

 

STEP 1:

LOOSELY assemble two BASE PLATES (3) to the FRAME (1) and BASE (2) using four 3/8 X 3-3/4” BOLTS (30) and four 3/8” LOCK NUTS (34). See FIGURE 1.

Insert two 3/8 x 9/16” FLANGE SPACERS (41) into the upper holes in the FRAME (1) as shown in figure 1

LOOSELY assemble the FOOTPLATE (62) to the lower holes in the FRAME (1) using one 3/8 x 3” BOLT (29) and one 3/8 LOCKNUT (34)

6

Image 6
Contents GYM System Important Safety Information Important Notes Square = 1’ X 1’ Minimum Required Usable Space Length Parts List Step Step Found in the Shroud KIT BOX into the Base ARM Handle Locking Spring Pin 33 1/2 X Step 32 1/2 X Illustration a 31 3/8 X X 3-3/4 31 3/8 X IMPORTANT! do not Overtighten Press ARM should Rotate Freely X 3 X 3-3/4 X 1 -3/4 X 3-3/4 Step Pull Maintenance Limited Warranty Life Fitness Consumer Division