Reebok Fitness RBEX71507.0 manual Be careful to avoid pinching the Wire Harnesses 31

2.While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (14) to the Frame with two M10 x 73mm Button Bolts (33) and two M10 Black Split Washers (34).

2

14

1

34

34

33

3.While another person holds the Upright (3) near the Frame (1), connect the Upper Wire Harness (32) to the Lower Wire Harness (31).

Tip: Avoid pinching the wire harnesses dur- ing this step. Gently pull the upper end of the Upper Wire Harness (32) to remove the slack, and slide the Upright (3) onto the Frame (1).

Attach the Upright with three M10 x 20mm Button Screws (35) and three M10 Bright Split Washers (55).

3

Be careful to avoid pinching the Wire Harnesses (31, 32)

3

		55	35
35	55	32
		31
		1

4.Attach the Water Bottle Holder (29) to the Upright (3) with two M4 x 15mm Screws (15).

4

3 29

15

6