8.The Console (6) can be operated with four 1.5V “D” batteries (not included); alkaline batteries are recommended. IMPORTANT: If the exer- cise cycle has been exposed to cold temper- atures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the console displays or other electronic components may become damaged. Press the tab on the battery cover and remove the battery cover. Insert four batter- ies into the console; make sure that the bat- teries are oriented as shown. Then, reattach the battery cover.
The Console (6) can also be operated with an optional power supply (not included). To pur- chase a power supply, call the telephone number on the front cover of this manual. To avoid damaging the console, use only a
9.While another person holds the Console (6) near the Upright (3), connect the console wire harness to the Upper Wire Harness (32).
Tip: Start all screws before tightening any of them. Also, avoid pinching the Wire Harness during this step. Insert the excess Wire Harness (32) downward into the Upright (3). Attach the Console (6) to the Upright with four M4 x 15mm Screws (40).
8 |
6 |
Batteries |
Battery |
Cover |
9 |
6 |
3 |
Console Wire
32 Harness
40
8