SM22 Assembly Instructions
Follow the steps below when unpacking the SM22.
1.Remove the cross brace and top brace 2 x 4’s (circled in Figure 1).
2.Remove the bolt bag.
3.Unbolt the Bottom Brace and lift it off of the pallet.
4.Unbolt the Top and lift it off of the pallet.
5.Slide the Back Brace off of the pallet.
WARNING: THE SIDES OF THE SM22 ARE VERY UNSTABLE UNTIL THE MACHINE HAS BEEN COMPLETELY ASSEMBLED. SOMEONE SHOULD BE HOLDING THE SIDES UNTIL THEY HAVE BEEN ASSEMBLED.
Figure 2. Sides lagged down.
6.WITH SOMEONE HOLDING UP THE LEFT SIDE, unbolt the left side from the pallet. Carefully remove the side from the pallet and make sure it is placed in a stable position.
7.Repeat Step 6 for the Right Side.
8.Remove the packaging materials from the machine and discard it along with the lag bolts and the pallet.
3