SM80 Unpacking & Assembly Instructions
6.Bolt the floating pulleys into the 190 lb weight stacks used for the crossovers using a 7/8” combination wrench. You will need to remove the pulley from the housing to thread the plug into the weight stack bayonet. Make sure the 9/16” jam nut is threaded
Figure 12. Bolt the floating pulleys into the crossover 190 lb weight stacks.
7.Mount the seated row and lat benches to the frame. Using the bolts specified in Figure 14 and a 9/16” socket and combination wrenches, mount the benches as shown in Figures 13 and 14.
10