Signature Olympic Decline Bench
5.Attach the KNEE SUPPORT ASSEMBLY (D) to the PIVOT HUB (E) using two M10 X 25mm BOLTS (4) and two 3/8" SAE WASHERS (5) as shown. Tighten all BOLTS securely.
6.Attach the BACK PAD (16) and HEAD REST (17) to the CENTER FRAME
(1) using five M10 X 35mm BOLTS (18) and five 3/8" SAE WASHERS (5), as shown. Tighten all bolts securely.
7.Install 1" HOLE PLUGS (19) into all open bolt holes.
© 2007 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation.
SODB 1/012/07 8183601