Models NEW 95TI Treadmills

TOOLS REQUIRED: Phillips Screwdriver, Metric Allen Set, M16 & M17 Wrench

PARTS NOT USED FROM KIT: (1) Main Bracket Cap, (1) Grommet

1.Turn off the treadmill and unplug it from the power outlet.

2. Remove the six SCREWS securing the MOTOR COVER. Remove the MOTOR COVER and set it and the screws aside.

3.Remove the protective liner from one of the provided FASTENER STRIPS. Attach the fastener

strip to the bottom of the POWER BLOCK (1). Interlock the remaining FASTENER STRIP to the installed FASTENER STRIP. Remove the remaining protective liner from FASTENER STRIP and secure the POWER BLOCK to the FRAME as shown.

4. Plug the POWER CORDS (2) leading from the MOTOR COMPARTMENT and LEFT UPRIGHT into their respective ends of the POWER BLOCK (1). Feed excess cable into the LEFT UPRIGHT.

5. Re-install the MOTOR COVER using the six previously removed SCREWS.

6.Attach the LOWER MOUNTING BRACKET (3) to the MAIN BRACKET (4) as shown using four SCREWS (5) and WASHERS (6) each. Tighten the SCREWS securely. (8-10 ft. lbs.)

7.Slide the new BRACKET COVER (7) over the top end of the MAIN BRACKET (4) and down to meet the LOWER MOUNTING BRACKET (3) as shown.

8.Attach the TV BRACKET (with bent tab) (8) to the MAIN BRACKET (4) as shown using four SCREWS (5) and WASHERS (6). Tighten the SCREWS securely. (8-10 ft. lbs.)

9. Remove the two SCREWS (9) securing the REAR CONSOLE COVER (10) to the FRAME. Remove the REAR CONSOLE COVER. Remove the TOP INSERT (11) from the REAR CON- SOLE COVER and discard. Set the REAR CONSOLE COVER aside.

Achieve Console Units Only:

10.Remove the two SCREWS (--) securing the BOTTOM INSERT (--) and remove the insert. Do not discard the SCREWS.

11.Locate the REMOTE CONTROL (--) and REMOTE BRACKET (--). Feed the REMOTE CABLE (-- ) through the large access hole in the REMOTE BRACKET (--). With the REMOTE CONTROL (-

-) and REMOTE BRACKET (--) oriented as shown, secure them together using one SCREW. Tighten the SCREW securely.

12.Carefully feed the REMOTE CABLE (--) through the opening in the bottom of the CONSOLE (-- ) and through the back of the CONSOLE. Position the REMOTE BRACKET (--) into position replacing the BOTTOM INSERT (--). Secure the REMOTE BRACKET using the previously removed SCREWS.

13.Carefully pull the MEDIA CABLE BUNDLE (12) (POWER, COAXIAL, I-R CONTROL

(remote cable on achieve consoles), S-VIDEO) from inside the CONSOLE BRIDGE (13). Un-bundle and straighten the MEDIA CABLES.

Install the COAXIAL EXTENSION COUPLER and COAXIAL EXTENSION CABLE.

14. Connect the I-R CONTROL (A) and S-VIDEO (B) CABLES to the back of the DISPLAY CONSOLE (C).

15. Tape the ends of the all CABLES (POWER, COAXIAL, I-R CONTROL (remote cable on achieve consoles), S-VIDEO) together.

16. Holding the MAIN BRACKET ASSEMBLY (4) close to the CONSOLE BRIDGE (13) as shown. With the holes facing upward, feed the taped end of the MEDIA CABLES (12) through the bottom of the MAIN BRACKET ASSEM- BLY and out of the UPPER HOLE as shown. Carefully pull excess MEDIA CABLE through the MAIN BRACKET ASSEMBLY.

17. Slide one GROMMET (14) over the taped end of the MEDIA CABLES (12). Install the GROMMET into the top access hole.

18. Tilt the MAIN BRACKET ASSEMBLY (4) upward and align the LOWER MOUNTING BRACKET (3) holes with those in

the CONSOLE BRACKET POSTS. Secure the MAIN BRACKET ASSEMBLY using four SCREWS (5) and WASHERS (6). Tighten the SCREWS securely. (8-10 ft. lbs.)

CAUTION: Raise the BRACKET COVER (7) to meet the exiting MEDIA CABLES before mounting the MAIN BRACKET ASSEMBLY.

LCD Entertainment Ready specifications

Life Fitness LCD Entertainment Ready is an innovative solution designed to enhance the workout experience while providing an outlet for entertainment and motivation. This state-of-the-art display technology is integrated into a wide range of Life Fitness cardio equipment, allowing users to stay engaged during their exercise routines. The LCD screens offer a vivid display that provides easy access to entertainment options, workout stats, and various fitness programs.

One of the standout features of Life Fitness LCD Entertainment Ready is its versatility. The screens are compatible with various entertainment platforms, enabling users to connect their personal devices to stream their favorite shows, movies, or music. This feature not only helps to make workouts more enjoyable but also encourages longer duration exercise sessions as individuals become immersed in their content.

In terms of technology, the Life Fitness LCD systems are equipped with high-definition screens that provide clear and concise visuals. The user interface is intuitive, allowing for easy navigation of multiple options, whether it’s tuning into a TV show or monitoring workout progress. Additionally, the screens are often touch-sensitive, providing a seamless interaction experience for users.

Another key characteristic of this entertainment system is its focus on user engagement. The interface not only provides entertainment but also promotes fitness goals through real-time feedback. Users can track calories burned, distance traveled, and heart rate. This information helps in maintaining motivation and allows individuals to adjust their workouts for optimal performance.

Moreover, Life Fitness prioritizes practicality and ease of installation. The LCD Entertainment Ready feature is designed to be integrated easily into the Life Fitness equipment lineup. Whether it's treadmills, stationary bikes, or ellipticals, this feature enhances the existing functionalities of the machines without compromising space or usability.

In conclusion, the Life Fitness LCD Entertainment Ready system exemplifies the merging of fitness and technology, creating an engaging workout environment. With its high-definition displays, entertainment compatibility, and user-friendly interface, it transforms routine exercise into a more enjoyable and motivating experience. This innovation showcases Life Fitness’s commitment to enhancing health and well-being through advanced technology and user-centric design.