Life Fitness LCD Entertainment Ready Installation Models 95XI, 93X, 90X CROSS-TRAINERS

Page 22

INSTALLATION

MODELS 95XI, 93X, 90X CROSS-TRAINERS

TOOLS REQUIRED: Metric Hex Key Set, Side Cutters, T-45 Torx Wrench

NOTE: Proceed with the following steps before attaching the DISPLAY CONSOLE as described in the Assembly Instructions. Do not install the left BULLHORN and BULLHORN COVER. Do not install the ACESSORY TRAY.

If the left bullhorn has been installed, follow steps 1 & 2 for removal.

1.Remove the SCREW (22) securing the LEFT BULLHORN COVER (15). Set the LEFT BULLHORN COVER and SCREW aside.

2.Remove the two SCREWS (2) securing the LEFT BULLHORN (13) to the LEFT BULLHORN MOUNTING PLATE (D). Remove the

LEFT BULLHORN.

3.Locate the supplied NEW LEFT BULLHORN (a). Secure it in place using the two previously removed SCREWS (2). Tighten the SCREWS to 15-20 ft-lbs.

4.Replace the LEFT BULLHORN COVER (15) and secure it using the previously removed SCREW (22). Tighten the SCREW securely. Slide the BULLHORN COVER GASKET downward to meet the LEFT BULLHORN COVER.

5.Locate the REMOTE CONTROL (b). Configure the REMOTE CONTROL for a HORIZON-

TAL (C-H) installation. Secure the REMOTE CONTROL to the top of the MOUNTING

FINGER (c) located on the NEW LEFT BULLHORN () as shown. Be sure the

CABLE TIES (C-H) are pulled tight and trim the excess CABLE TIES.

6.Route the REMOTE CABLE (d) through the MONOCOLUMN (H) and up through

the top of the CONSOLE SUPPORT (7) alongside the POWER CORD and COAXI-

AL CABLE.

7. Locate the MOUNTING BRACKET (e). With the mounting holes in the tube facing downward, slide the tube portion of the MOUNTING BRACKET into the top of the CON-

SOLE SUPPORT (7). Align the inserts in the tube with the mouting holes on the underside of the CON- SOLE SUPPORT. Secure the MOUNTING BRACKET using two SCREWS (f). Tighten the SCREWS securely.

CAUTION: Do not to pinch and cables when inserting the MOUNTING BRACKET (e) into the CONSOLE SUPPORT (7).

8. Install the DISPLAY CONSOLE (4) as instructed in the Assembly Instructions using the four new 1-1/2" SCREWS supplied. Tighten the SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS.

CAUTION: Do not pinch any wires when assembling the DISPLAY CONSOLE (4) to the CONSOLE SUPPORT (7).

9.Install the ACCESSORY TRAY (17) as instructed in the Assembly Instructions. Tighten the SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS.

NOTE: Feed any excess REMOTE CABLE (d) into the MONOCOLUMN

(H).

CAUTION: Do not pinch any wires when inserting the ACCESSORY TRAY (17) into the MONOCOLUMN (H).

10. Attach the ADAPTER BRACKET (AA) to the ENTERTAINMENT CON-

SOLE (g) to the using four SCREWS (BB). Tighten the SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS.

Attach the ENTERTAINMENT CONSOLE to the MOUNTING BRACKET (e) using four SCREWS (j) and WASHERS (k). Tighten the SCREWS to 6-8 in-lbs. Do not overtighten the SCREWS.

11.Connect the COAXIAL CABLE, POWER CORD and REMOTE CABLE (d) to the rear of the ENTERTAINMENT CONSOLE (g) as shown under Console Cable Connections at the end of this manual.

12.CABLE TIE (m) any excess cable together behind the ENTERTAINMENT CONSOLE (g) and position the cables between the MOUNT- ING BRACKET (e) and the DISPLAY CONSOLE (4).

13.Install the CONSOLE SUPPORT COVER (8) and secure it using the two previously removed SCREWS (2).

14.Locate the NEW TOP CAP (n). Place the NEW TOP CAP into position at the top of the CON- SOLE SUPPORT COVER (8). Be sure the TOP CAP snaps securely in place.

15.Secure the POWER ADAPTER (o) to the FRONT STABILIZER (p) using two CABLE

TIES (m) as shown. Be sure the CABLE TIES are pulled tight and trim the excess CABLE TIES. Connect the screw-type connector of the POWER CORD (q) to

the underside receptacle. Bundle excess POWER CORD and store under the unit. Connect the COAXIAL CABLE (r) to the broadcast supply cable in simi-

lar fashion. 16. Connect the POWER SUPPLY CORD to the POWER ADAPTER (o).

17. Continue with the remainder of assembly as instructed in the Assembly Instructions. Plug the POWER SUPPLY CORD into an electrical outlet upon completion.

20

Page 21 Page 23
Image 22
Page 21 Page 23
Contents LCD Entertainment Ready Page Corporate Headquarters Page Table of Contents Important Safety Instructions Save These Instructions for Future ReferenceConsignes DE Securite Importantes Conserver CES Instructions Pour Tout Usage UltérieurInstallation Antenna Grounding According to the NECModels NEW 95TI Treadmills Installation Achieve Console Units Only Play Console Models NEW 95C Upright Lifecycle Exercise Bikes Bracket Assembly Adapter o Play Console Models 95LI Summit Trainer Console Mounting Plate D Screws Models 95RI, 93R, 90R Recumbent Lifecycle Exercise Bikes Console 9 to the Console Mounting Plate D Installation Models 95XI, 93X, 90X CROSS-TRAINERS Left BullhornModels 91TI, 90T Treadmills Installation Models 97TI, 95TI, 93T Treadmills Nism Console Cable Connections Installation M051-00K71-A002

LCD Entertainment Ready specifications

Life Fitness LCD Entertainment Ready is an innovative solution designed to enhance the workout experience while providing an outlet for entertainment and motivation. This state-of-the-art display technology is integrated into a wide range of Life Fitness cardio equipment, allowing users to stay engaged during their exercise routines. The LCD screens offer a vivid display that provides easy access to entertainment options, workout stats, and various fitness programs.

One of the standout features of Life Fitness LCD Entertainment Ready is its versatility. The screens are compatible with various entertainment platforms, enabling users to connect their personal devices to stream their favorite shows, movies, or music. This feature not only helps to make workouts more enjoyable but also encourages longer duration exercise sessions as individuals become immersed in their content.

In terms of technology, the Life Fitness LCD systems are equipped with high-definition screens that provide clear and concise visuals. The user interface is intuitive, allowing for easy navigation of multiple options, whether it’s tuning into a TV show or monitoring workout progress. Additionally, the screens are often touch-sensitive, providing a seamless interaction experience for users.

Another key characteristic of this entertainment system is its focus on user engagement. The interface not only provides entertainment but also promotes fitness goals through real-time feedback. Users can track calories burned, distance traveled, and heart rate. This information helps in maintaining motivation and allows individuals to adjust their workouts for optimal performance.

Moreover, Life Fitness prioritizes practicality and ease of installation. The LCD Entertainment Ready feature is designed to be integrated easily into the Life Fitness equipment lineup. Whether it's treadmills, stationary bikes, or ellipticals, this feature enhances the existing functionalities of the machines without compromising space or usability.

In conclusion, the Life Fitness LCD Entertainment Ready system exemplifies the merging of fitness and technology, creating an engaging workout environment. With its high-definition displays, entertainment compatibility, and user-friendly interface, it transforms routine exercise into a more enjoyable and motivating experience. This innovation showcases Life Fitness’s commitment to enhancing health and well-being through advanced technology and user-centric design.
Top Page Image Contents