Life Fitness FIT 1.0 CM manual Refer Toshroudkit

Page 18

REFER TOSHROUDKIT

FIGURE 11

STEP 11:

‰Lift HEAD PLATE ASSEMBLY and insert 15 or 20 WEIGHT PLATES (46).

‰Apply WEIGHT STACK LABELS (47) starting with “1” on the HEAD PLATE and descending down.

‰REFER TO SHROUD ASSEMBLY GUIDE TO ASSEMBLY REAR SHROUD

‰Referencing step 7, push back on ITEM (3) at end of cable and attach SHORTER HANDLES (38) to top of frame

‰Repeat process for attaching the ADJUSTABLE HANDLES (40 ) to the lower cable ends and the medium handles (39) to the middle ends.

NOTE: THIS IS THE HANDLE CONFIGURATION THAT IS USED FOR MOST EXERCISES REFER TO WALL CHART AND USER DVD.

‰The FOOT STRAP (41) is to be attached to one of the mid section pulley cable ends for leg extensions and to one of the lower pulley cable ends for leg curl exercises.

18

Image 18
Contents GYM System User Guide Important Safety Information GYM Dimensions Components List Exploded View Hardware Required Tools Securley Tighten Do not Overtighten Page ‰ Securely Tighten ALL Frame Connections EYE Hook Orientation ‰ Repeat Above Process for Other Guide Cable Page Step ‰ USE this Assembly AT the END of Each Cable ‰ Securely Tigthen Cable Guides Refer to , PIN Must be Do not Overtighten Screws Install Screw Refer Toshroudkit Maintenance Warranty Information Limited Warranty Life Fitness