Life Fitness FIT 1.0 CM manual PIN Must be

Page 16

3/8 x 3/4

PIN MUST BE

LOCATED ON

TOP SIDE

FIGURE 9

STEP 9:

‰Pre-assemble two FLANGE BEARINGS (23) and SHAFT (32) into ADJUSTMENT HUB as illustrated

‰Attach ROLLER PAD ASSEMBLY (3) to center hole ADJUSTMENT HUB using two 3/8 WASHERS (28) and two 3/8 X 3/4 BOLTS (31) and tighten SECURELY.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents GYM System User Guide Important Safety Information GYM Dimensions Components List Exploded View Hardware Required Tools Securley Tighten Do not Overtighten Page ‰ Securely Tighten ALL Frame Connections EYE Hook Orientation ‰ Repeat Above Process for Other Guide Cable Page Step ‰ USE this Assembly AT the END of Each Cable ‰ Securely Tigthen Cable Guides Refer to , PIN Must be Do not Overtighten Screws Install Screw Refer Toshroudkit Maintenance Warranty Information Limited Warranty Life Fitness
Top Page Image Contents