Cableguide

5
4(a)
CABLEGUIDE
5
12
3/8 X 1-3/4” 10
4(b)
2
FIGURE 4

STEP 4:

•Screw the threaded end of the LEG PRESS CABLE (4) into the end of the FLOATING PULLEY BRACKET. Secure the CABLGUIDE in place with the JAM NUT on the GUIDE CABLE. See FIGURE 4(a)

•Route the LEG PRESS CABLE (3) around one 3-1/2” PULLEY (5) and re-assemble the PULLEY to the FLOATING PULLEY PLATES usingthe BOLT, NUT and PULLEY which were removed. See FIGURE 4.

•Assemble one 3-1/2 PULLEY (5) to the PULLEY HOUSING (2) using one 3/8 X 1-3/4” BOLT (10) and one 3/8” LOCK NUT (12) as shown in FIGURE 4(b). NOTE: CABLEMUSTBEPLACEDIN PULLEYHOUSINGBEFOREINSTALLING PULLEY

	1/2		1/2		1/2		1/2		1/2		1/2
0		1		2		3		4		5		6

STEP 4: