Life Fitness 849 manual It in the the slot

		42
		LAT
		CABLE
82		55
69
		11
		48
FIGURE 25	25	90 3/8 X 2-3/4”

STEP 25:

•Route the LAT CABLE (42) around the pulley in FLOATING PULLEY STOP (11) and the FLOATING PULLEY BRACKET (55) as shown in FIGURE 25. (NOTE: The CABLE CLIPS may need to be loosened.)

•SECURELY assemble two 4-1/2” PULLEYS (48) into the slots of the BASE (25) using two 3/8 X 2-3/4” BOLTS (90), four 3/8” FLANGE SPACERS (69), and two 3/8” LOCK NUTS (82). (NOTE: Loop the cable around each pulley prior to inserting it in the the slot.)

	48
LAT CABLE 42		30
82
69
	116	90 3/8 X 2-3/4”
FIGURE 26

STEP 26:

•Route the threaded end of the LAT CABLE (42) through the TOP BOOM (30) and down through the PEC GUIDE ROD SUPPORT (22) as shown in FIGURE 26.

•SECURELY assemble one 4-1/2” PULLEY (48) into the rear slot of the TOP BOOM (30) using one 3/8 X 2-3/4” BOLT (90), two 3/8” FLANGE

SPACERS (69), one 2-7/8” X 2-1/4” CABLE CLIP(116) and one 3/8” LOCK NUT (82). (NOTE: Loop the cable around the pulley prior to inserting

it in the the slot.)

23