AHU system

Overview

The POD AHU systems are designed to condition the air in a portable, containerized computer room, and are installed directly on top of the HP POD 240e NA. The HP POD 240e NA includes a total of four cradles, each holding 3 Adiabatic units, for a total of 12 Adiabatic units.

The AHU system requires a potable water source and HP highly recommends installing a filter to be sure that water is free of particles. For more information about water requirements, see the HP Performance Optimized Datacenter 240e NA Site Preparation and Requirements Guide.

Adiabatic components

Each Adiabatic unit is housed in a NEMA 3 rated steel frame cabinet that is rated for outdoor use. The exterior of the cabinet is coated with a durable finish to protect against corrosion. Access panels are located on the front and on the rear of the cabinet for easy access to all of the components. The access panels are safety interlocked with the power disconnect switch to prevent the removal of the panel when the switch is in the ON position. The power disconnect switch must be turned OFF to gain access to the electrical compartment.

Side view shown

Item

Component

Description

 

 

 

 

 

1

Lifting eyes*

For crane attachment to lift the Adiabatic unit during assembly

 

2

Inclement weather

Prevents snow or heavy rain from entering the Adiabatic unit. The inclement

 

 

hood

weather hood is also equipped with a screen to prevent birds and other small

 

 

 

animals from nesting in the air inlet opening.

 

 

 

 

 

3

Access panel to the

Provides access to the damper actuator motor

 

 

damper actuator

 

 

 

 

AHU system 61