Image IMTL13905.0 Directly from OUR WEB Site, Follow the on-line instructions to start Program

Page 25

HOW TO USE AN IFIT.COM PROGRAM

DIRECTLY FROM OUR WEB SITE

Our Web site at www.iFIT.com allows you to access programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details.

To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO CONNECT YOUR COMPUTER on page 22. In addition, you must have an internet connection and an internet service provider. A list of specific system re- quirements is found on our Web site.

Follow the steps below to use a program from our Web site.

1 Insert the key into the console.

See HOW TO TURN ON THE POWER on page 12.

2 Identify yourself as user A, B, C, or D.

See step 2 on page 12.

3 Select the iFIT.com mode.

See step 3 on page 23.

Go to your computer and start an internet

4 connection.

Start your web browser, if necessary, and go to

5 our Web site at www.iFIT.com.

Follow the desired links on our Web site to se-

6 lect a program.

Read and follow the on-line instructions for using a program.

Follow the on-line instructions to start the

7 program.

When you start the program, an on-screen count- down will begin.

Return to the treadmill and stand on the foot

8 rails. Find the clip attached to the key and slide the clip onto the waistband of your clothes.

When the on-screen countdown ends, the program will begin and the walking belt will begin to move.

Hold the handrails, step onto the walking belt, and begin walking. During the program, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change.

CAUTION: Always listen for the “chirp” and be prepared for speed and/or incline changes.

If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings for the program.

To stop the walking belt at any time, press the Stop button on the console. The time will begin to flash in the display. To restart the program, press the Start button or the Speed increase button. After a moment, the walking belt will begin to move at 1.0 mph. When the next “chirp” is heard, the speed and incline will change to the next settings of the program.

When the program is completed, the walking belt will stop. Note: To use another program, press the Stop button and go to step 5.

Note: If the speed and/or incline of the treadmill does not change when a “chirp” is heard, make sure that the letters “iFIT” appear in the display and that the time is not flashing. In addition, make sure that the audio cable is properly con- nected.

9 Adjust the cushioning system as desired.

See step 6 on page 13.

10 Follow your progress with the display.

See step 7 on page 13.

11 Measure your heart rate if desired.

See step 8 on page 14.

12 Turn on the fans if desired.

See step 9 on page 14.

13 When you are finished exercising, remove the key from the console.

See step 10 on page 16.

25

Image 25
Contents Model No. IMTL13905.0 Serial No QUESTIONS?Call TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Page Before YOU Begin Assembly This step Firmly tighten the four Console BoltsUpright 111 make sure that the top of the Long Page HOW to Move the Treadmill HOW to Plug in the Power Cord Operation and AdjustmentPRE-LUBRICATED Walking Belt Features of the Console HOW to USE the Manual Mode HOW to Turn on the PowerFollow your progress with the display Adjust the cushioning system as desiredTurn on the fans if desired Measure your heart rate if desiredWhenkey. you are finished exercising, remove Select one of the preset programs HOW to USE a Preset ProgramAdjust the intensity level of the program if Desired Identify yourself as user A, B, C, or DAdjust the cushioning system as desired Select one of the custom programs HOW to Create a Custom ProgramHOW to USE a Custom Program Enter a maximum target heart rate setting HOW to USE a Heart Rate ProgramSelect a heart rate program Follow your progress with the displays HOW to Connect Your Portable Stereo HOW to Connect Your MP3 Player or CD PlayerAudio Cable HOW to Connect Your Computer HOW to Connect Your Home StereoPress the Play button on your MP3 player, CD Player, or VCR HOW to Connect Your VCRFollow your progress with the display Follow the on-line instructions to start Program Directly from OUR WEB SiteReturn to the treadmill and stand on the foot Optional Chest Pulse Sensor Information MODE/DEMO ModeProblem The power turns off during use TroubleshootingTop Problem The walking belt slows when walked on Exercise Intensity Conditioning GuidelinesWorkout Guidelines Exercise FrequencyQty Description R1005AQty Exploded DRAWING-Model No. IMTL13905.0 Exploded DRAWING-Model No. IMTL13905.0 Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT