Image IMEL08900 manual HOW to Select Kilometers or Miles

Page 13
Metal
Contacts
Mode
Arrow
Mode
Button

The scan modeÑ

Repeatedly press the mode button until an arrow appears

under the scan symbol. When the scan mode is selected, the

console will display the speed, time, distance, lap and calorie modes, for 5 seconds each, in a repeating cycle.

The speed, time, dis- tance, lap, or calorie modeÑ Repeatedly

press the mode button

until an arrow appears below or above the desired mode symbol. Make sure that there is not an arrow under the scan symbol.

The pulse modeÑTo use the pulse mode, see step 5.

To reset the display, press the on/reset button.

5Measure your heart rate if desired

To use the

pulse sensor, place your

hands on the metal con- tacts. Your

palms must be resting on

the upper contacts and your fingers

must be touching the lower contacts. Avoid mov- ing your hands. After a moment, the heart-shaped indicator in the display will begin to flash and your

heart rate will be shown. For the most accurate heart rate reading, continue to hold the contacts for about 15 seconds.

Make sure that your hands are positioned as described above, and that you are not moving your hands excessively or squeezing the metal contacts too tightly.

6Turn off the power

To turn off the power, simply wait for about six minutes. If the pedals are not moved and the console buttons are not pressed for six minutes, the power will turn off automatically.

HOW TO SELECT KILOMETERS OR MILES

The console can

display distance

and speed in either kilometers or miles. If a ÒKPHÓ appears in

the display, dis- tance and speed

will be shown in kilometers; if a ÒKPHÓ does not

appear, distance and speed will be shown in miles.

To change the

 

unit of measure-

 

ment, first

 

remove the four

 

indicated screws

 

from the con-

 

sole. Lift the

 

console a few

 

inches and turn

 

it over; be care-

Switch

ful not to pull

 

on the wires.

 

Next, locate the

Screws

small switch on

 

the back of the

 

console. Slide the switch up or down to change the unit of measurement. Reattach the console with the four screws; be careful not to pinch any of the wires.

13

Image 13
Contents Customer HOT Line QUESTIONS?Table of Contents Important Precautions Front Before YOU BeginRight Side BackAssembly Locknut the Incline Bracket must pivot easily Page View FrontPage HOW to Adjust the Resistance HOW to USE the Elliptical CrosstrainerExercising on the Elliptical Crosstrainer Using the Upper Body Arms Incline Adjustment Description of the ConsoleSelect one of the three pacer programs or the manual mode Turn on the powerHOW the Pacer Programs Operate STEP-BY-STEP Console OperationHOW to Select Kilometers or Miles Pulse Sensor TROUBLE-SHOOTING Maintenance and TROUBLE-SHOOTINGExercise Intensity Conditioning GuidelinesUnconditioned Conditioned Training Zone AGE BEATS/MIN Workout GuidelinesSuggested Stretches Page Key Qty Description Part LISTÑModel No. IMEL08900IMEL08900NRAWINGÑModelDEXPLODEDo Limited Warranty HOW to Order Replacement PartsIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT