JVC LVT1356-005A manual Recording from the Radio, To protect your recordings

Page 19
BEAT CUT

Recording

Continued

 

 

English

IMPORTANT:

It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.

The recording level is automatically set correctly, so it is not affected by the other sound settings. Thus, during recording you can adjust the sound you are actually listening to without affecting the recording level.

If recordings you have made have excessive noise or static, the unit may be too close to a TV. Increase the distance between the TV and the unit.

You can only use type I tape for recording.

• DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes

may be damaged.

DO NOT use type II and type IV tapes since the unit is not compatible with such tapes.

The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

At the start and end of cassette tapes

There is leader tape which cannot be recorded onto. Thus, when recording from discs, FM/AM broadcasts, or external equipment, wind the leader tape first to ensure that the recording will be made without losing any music.

To protect your recordings

Cassettes have two small tabs on the back to protect against unexpected erasure or re-recording.

To protect your recording, remove these tabs.

To re-record on a protected tape, cover the holes with adhesive tape.

Adhesive tape

Recording from the Radio

On the unit ONLY:

1 Put a recordable cassette in with the exposed part of the tape down.

• See also page 15.

2 Close the cassette holder gently.

3 Press TUNER/BAND to select either

BAND

“FM” or “AM.”

TUNER

 

• When recording from discs, see “Recording Discs—Disc Synchronized Recording” on page 17.

4 Tune in to the station you want to record.

5 Press (recording).

and # lock down, and the recording starts.

You cannot press in the following cases:

If no cassette is inserted.

If a protected tape is inserted.

To stop recording for a moment, press *

(pause).

To resume recording, press * again.

To stop recording, press &/).

To remove the cassette, press &/) while

recording is stopped.

To record an AM station—Beat Cut

On the remote control ONLY:

While recording an AM broadcast, beats may be heard (which are never heard when listening to the broadcast without recording it).

If this occurs, press BEAT CUT repeatedly, while recording, until the beats are reduced.

Each time you press the button, the display alternates between “CUT–1” and “CUT–2.”

16

Image 19
Contents Micro Component System Page Important for Laser Products Introduction PrecautionsAbout This Manual Contents Front view Inside the front cover Location of the Buttons and ControlsMain Unit Top viewDisplay window Display window on the front panelMHz KHz Main unitRemote Control To connect speakers Getting StartedUnpacking Connections Release your finger from the clampConnect the supplied AM loop antenna to AM Loop terminal Adjusting the Voltage SelectorTo connect AM and FM antennas Selecting the Source Setting the ClockTurning On the Power Basic and Common OperationsReinforcing the Bass Sound Adjusting the Volume Selecting the Sound ModesTo turn off the sound temporarily Tuning in to a Station Setting the Tuner Interval SpacingListening to FM and AM Broadcasts Press or to select a preset number Press Program again Presetting StationsTuning in to a Preset Station Press or to select a preset number Press ProgramPlaying Back the Entire Disc-Normal Play Playing Back DiscsRepeat to program other tracks you want Press CD 3 On the remote control only Place a discBasic Disc Operations Press ¢ or 4 to select Track number, then press ProgramRepeating Tracks-Repeat Play Playing at Random-Random PlayDisplaying the Remaining Time during Playback To remove the cassette, press &/ while Playing Back TapesPlaying Back a Tape Press # playTo protect your recordings RecordingRecording from the Radio Tune in to the station you want to record Press ‡ recordingTo stop recording, press Recording Discs Disc Synchronized RecordingUsing the Daily Timer Using the TimersHow the Sleep Timer actually works Using the Sleep TimerDaily timer mode On the remote control only Press SleepHandling cassette tapes MaintenanceCleaning the unit Handling discsSymptom TroubleshootingPossible Cause Action CD player Supplied accessoriesAmplifier Section-CA-UXG1 TunerFront Side Bottom Side LVT1356-008A Page Important for Laser Products Introduction Contents Location of the Buttons and Controls Sync Remote Control Getting Started NOW you are ready to plug in the unit Basic and Common Operations Adjusting the Volume Selecting the Sound Modes Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Troubleshooting Specifications EN, CS 0505NYMMDWORI Sistemas DE Microcomponentes Sistema DE Micro Componentes PRECAUCIÓN-Botón STANDBY/ON Precaución UX-G1 Important for Laser Products Introduction Contents Location of the Buttons and Controls Sync Remote Control Getting Started NOW you are ready to plug in the unit Basic and Common Operations Adjusting the Volume Selecting the Sound Modes Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Troubleshooting Specifications Bottom Side Lado inferior Parte Inferior

LVT1356-005A specifications

The JVC LVT1356-005A is an exceptional audio accessory known for its remarkable sound quality and reliability. JVC, a company with a long-standing reputation in the electronics industry, has equipped this model with a variety of features designed to enhance the user experience.

One of the standout characteristics of the LVT1356-005A is its sleek and modern design, which complements a wide range of audio systems. The unit is designed for seamless integration, making it compatible with various JVC products as well as other brands. This versatility allows for easy setup and use in different environments, whether at home or in a professional setting.

The LVT1356-005A benefits from advanced sound technologies, particularly in terms of audio clarity. It utilizes high-quality materials in both the speakers and internal components, which contribute to a balanced and immersive sound profile. This model is engineered to reproduce a wide frequency range, ensuring that listeners experience music as it was intended by the artist.

Connectivity is another important aspect of the JVC LVT1356-005A. It offers multiple input options, allowing users to connect to various devices without hassle. This makes it a convenient choice for those who enjoy playing music from smartphones, tablets, or computers. Additionally, the model's compatibility with different audio formats enhances its appeal, making it suitable for versatile multimedia applications.

Durability is a key consideration in the design of the LVT1356-005A. Constructed with robust materials, it is built to withstand regular use, ensuring longevity. This reliability is particularly beneficial for professional users who require equipment that can endure the rigors of frequent transportation and setup.

The ease of use is further enhanced by user-friendly controls, which allow for quick adjustments to volume and settings. The intuitive layout ensures that even those new to audio equipment can operate the LVT1356-005A without confusion.

In summary, the JVC LVT1356-005A combines modern design, exceptional sound quality, versatile connectivity, and durability. These features make it an ideal choice for both casual listeners and audio professionals seeking reliable performance in their audio equipment.