JVC LVT1356-005A manual Maintenance

Page 49

Maintenance

To get the best performance of the unit, keep your discs, tapes and mechanism clean.

English

General Notes

In general, you will have the best performance by keeping your discs, tapes and the mechanism clean.

•Store discs and tapes in their cases, and keep them in cabinets or on shelves.

Cleaning the unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the unit may deteriorate in quality, become damaged or have its paint peel off, be careful about the following:

–DO NOT wipe it with a rough cloth.

–DO NOT wipe it too vigorously.

–DO NOT wipe it with thinner or benzine.

–DO NOT apply any volatile substance such as an insecticide to it.

–DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

•Remove the disc from its case by holding it at the edge while pressing

the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

DO NOT use any solvent—such as conventional record cleaner, spray, thinner, or benzine—to clean

the disc.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

•If the tape is loose, it may get stretched, cut, or caught in the cassette.

•Be careful not to touch the tape surface.

•Avoid storing tapes in any of the following places:

– In dusty places

– In direct sunlight or heat

–In moist areas

–On a TV or speaker

–Near a magnet

To keep the best recording and playback sound quality

You need to clean the heads.

•Clean the heads after every 10 hours of use with

a wet-type head cleaning tape (available at electronic and audio shops).

When the head becomes dirty, the following symptoms will occur:

–Sound quality is reduced.

–Sound level decreases.

–Sound drops out.

•Do not play dirty or dusty tapes.

•Do not touch the highly-polished head with any metallic or magnetic tools.

Capstan

Head

Pinch Roller

To demagnetize the head

Turn off the unit, and use a head demagnetizer (available at electronic and audio shops).

20

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Micro Component System Page Important for Laser Products Introduction PrecautionsAbout This Manual Contents Main Unit Location of the Buttons and ControlsTop view Front view Inside the front coverMHz KHz Display window on the front panelMain unit Display windowRemote Control Unpacking Connections Getting StartedRelease your finger from the clamp To connect speakersConnect the supplied AM loop antenna to AM Loop terminal Adjusting the Voltage SelectorTo connect AM and FM antennas Turning On the Power Setting the ClockBasic and Common Operations Selecting the SourceReinforcing the Bass Sound Adjusting the Volume Selecting the Sound ModesTo turn off the sound temporarily Tuning in to a Station Setting the Tuner Interval SpacingListening to FM and AM Broadcasts Tuning in to a Preset Station Presetting StationsPress or to select a preset number Press Program Press or to select a preset number Press Program againPlaying Back the Entire Disc-Normal Play Playing Back DiscsBasic Disc Operations On the remote control only Place a discPress ¢ or 4 to select Track number, then press Program Repeat to program other tracks you want Press CD 3Repeating Tracks-Repeat Play Playing at Random-Random PlayDisplaying the Remaining Time during Playback Playing Back a Tape Playing Back TapesPress # play To remove the cassette, press &/ whileRecording from the Radio RecordingTune in to the station you want to record Press ‡ recording To protect your recordingsTo stop recording, press Recording Discs Disc Synchronized RecordingUsing the Daily Timer Using the TimersDaily timer mode Using the Sleep TimerOn the remote control only Press Sleep How the Sleep Timer actually worksCleaning the unit MaintenanceHandling discs Handling cassette tapesSymptom TroubleshootingPossible Cause Action Amplifier Section-CA-UXG1 Supplied accessoriesTuner CD playerFront Side Bottom Side LVT1356-008A Page Important for Laser Products Introduction Contents Location of the Buttons and Controls Sync Remote Control Getting Started NOW you are ready to plug in the unit Basic and Common Operations Adjusting the Volume Selecting the Sound Modes Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Troubleshooting Specifications EN, CS 0505NYMMDWORI Sistemas DE Microcomponentes Sistema DE Micro Componentes PRECAUCIÓN-Botón STANDBY/ON Precaución UX-G1 Important for Laser Products Introduction Contents Location of the Buttons and Controls Sync Remote Control Getting Started NOW you are ready to plug in the unit Basic and Common Operations Adjusting the Volume Selecting the Sound Modes Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Troubleshooting Specifications Bottom Side Lado inferior Parte Inferior

LVT1356-005A specifications

The JVC LVT1356-005A is an exceptional audio accessory known for its remarkable sound quality and reliability. JVC, a company with a long-standing reputation in the electronics industry, has equipped this model with a variety of features designed to enhance the user experience.

One of the standout characteristics of the LVT1356-005A is its sleek and modern design, which complements a wide range of audio systems. The unit is designed for seamless integration, making it compatible with various JVC products as well as other brands. This versatility allows for easy setup and use in different environments, whether at home or in a professional setting.

The LVT1356-005A benefits from advanced sound technologies, particularly in terms of audio clarity. It utilizes high-quality materials in both the speakers and internal components, which contribute to a balanced and immersive sound profile. This model is engineered to reproduce a wide frequency range, ensuring that listeners experience music as it was intended by the artist.

Connectivity is another important aspect of the JVC LVT1356-005A. It offers multiple input options, allowing users to connect to various devices without hassle. This makes it a convenient choice for those who enjoy playing music from smartphones, tablets, or computers. Additionally, the model's compatibility with different audio formats enhances its appeal, making it suitable for versatile multimedia applications.

Durability is a key consideration in the design of the LVT1356-005A. Constructed with robust materials, it is built to withstand regular use, ensuring longevity. This reliability is particularly beneficial for professional users who require equipment that can endure the rigors of frequent transportation and setup.

The ease of use is further enhanced by user-friendly controls, which allow for quick adjustments to volume and settings. The intuitive layout ensures that even those new to audio equipment can operate the LVT1356-005A without confusion.

In summary, the JVC LVT1356-005A combines modern design, exceptional sound quality, versatile connectivity, and durability. These features make it an ideal choice for both casual listeners and audio professionals seeking reliable performance in their audio equipment.
Top Page Image Contents