JVC LVT1356-005A manual Adjusting the Volume Selecting the Sound Modes

Page 38

English

Adjusting the Volume

Selecting the Sound Modes

 

 

 

You can adjust the volume level only while the unit is turned on. The volume level can be adjusted between “VOL MIN,” “VOL 1” – “VOL 39,” and “VOL MAX.”

• The volume level has no effect on recording.

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

• When you press and hold either button, you VOLUME can change the volume level continuously.

To turn off the sound temporarily

On the remote control ONLY:

Press MUTING.

MUTING

The volume level turn down and “MUTING” starts flashing on the display.

To restore the sound, press MUTING again.

• Adjusting the volume level also cancels the muting.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

DO NOT turn off (standby) the unit with the volume set to an extremely high level; Otherwise, the

sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

You can select one of the 4 sound modes.

•This function also affects the sound from headphones.

•This function only affects the playback sound, and does not affect your recording.

To select the sound modes, press SOUND/BASS

SOUND/

repeatedly.

 

BASS

 

 

 

 

 

 

 

•Each time you press the button, the sound mode changes as follows:

POP CLASSIC ROCK

FLAT JAZZ (Canceled)

POP: More presence in the vocals and midrange.

CLASSIC: Enriched sound with fine treble and ample bass.

ROCK: Powerful sound emphasizing treble and bass.

JAZZ: Accented lower frequencies for jazz-type music.

FLAT: Equalizer effect is canceled.

When the sound mode is activated, the SOUND indicator lights up on the display.

Reinforcing the Bass Sound

The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume—Hyper Bass Sound.

•This function also affects the sound from headphones.

•This function only affects the playback sound, and does not affect your recording.

To get the effect, press and hold SOUND/BASS

SOUND/

until “HBS ON” appears and the BASS indicator

 

BASS

 

 

lights up on the display.

 

 

 

 

•Each time you press and hold the button, the effect alternates on (“HBS ON”) and off (“HBS OFF”).

To cancel the effect, press and hold SOUND/BASS again until “HBS OFF” appears and the BASS indicator goes off.

9

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Micro Component System Page Important for Laser Products About This Manual PrecautionsIntroduction Contents Top view Location of the Buttons and ControlsMain Unit Front view Inside the front coverMain unit Display window on the front panelMHz KHz Display windowRemote Control Release your finger from the clamp Getting StartedUnpacking Connections To connect speakersTo connect AM and FM antennas Adjusting the Voltage SelectorConnect the supplied AM loop antenna to AM Loop terminal Basic and Common Operations Setting the ClockTurning On the Power Selecting the SourceTo turn off the sound temporarily Adjusting the Volume Selecting the Sound ModesReinforcing the Bass Sound Listening to FM and AM Broadcasts Setting the Tuner Interval SpacingTuning in to a Station Press or to select a preset number Press Program Presetting StationsTuning in to a Preset Station Press or to select a preset number Press Program againPlaying Back Discs Playing Back the Entire Disc-Normal PlayPress ¢ or 4 to select Track number, then press Program On the remote control only Place a discBasic Disc Operations Repeat to program other tracks you want Press CD 3Displaying the Remaining Time during Playback Playing at Random-Random PlayRepeating Tracks-Repeat Play Press # play Playing Back TapesPlaying Back a Tape To remove the cassette, press &/ whileTune in to the station you want to record Press ‡ recording RecordingRecording from the Radio To protect your recordingsRecording Discs Disc Synchronized Recording To stop recording, pressUsing the Timers Using the Daily TimerOn the remote control only Press Sleep Using the Sleep TimerDaily timer mode How the Sleep Timer actually worksHandling discs MaintenanceCleaning the unit Handling cassette tapesPossible Cause Action TroubleshootingSymptom Tuner Supplied accessoriesAmplifier Section-CA-UXG1 CD playerFront Side Bottom Side LVT1356-008A Page Important for Laser Products Introduction Contents Location of the Buttons and Controls Sync Remote Control Getting Started NOW you are ready to plug in the unit Basic and Common Operations Adjusting the Volume Selecting the Sound Modes Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Troubleshooting Specifications EN, CS 0505NYMMDWORI Sistemas DE Microcomponentes Sistema DE Micro Componentes PRECAUCIÓN-Botón STANDBY/ON Precaución UX-G1 Important for Laser Products Introduction Contents Location of the Buttons and Controls Sync Remote Control Getting Started NOW you are ready to plug in the unit Basic and Common Operations Adjusting the Volume Selecting the Sound Modes Listening to FM and AM Broadcasts Presetting Stations Playing Back Discs Basic Disc Operations Playing at Random-Random Play Playing Back Tapes Recording Recording Discs Disc Synchronized Recording Using the Timers Using the Sleep Timer Maintenance Troubleshooting Specifications Bottom Side Lado inferior Parte Inferior

LVT1356-005A specifications

The JVC LVT1356-005A is an exceptional audio accessory known for its remarkable sound quality and reliability. JVC, a company with a long-standing reputation in the electronics industry, has equipped this model with a variety of features designed to enhance the user experience.

One of the standout characteristics of the LVT1356-005A is its sleek and modern design, which complements a wide range of audio systems. The unit is designed for seamless integration, making it compatible with various JVC products as well as other brands. This versatility allows for easy setup and use in different environments, whether at home or in a professional setting.

The LVT1356-005A benefits from advanced sound technologies, particularly in terms of audio clarity. It utilizes high-quality materials in both the speakers and internal components, which contribute to a balanced and immersive sound profile. This model is engineered to reproduce a wide frequency range, ensuring that listeners experience music as it was intended by the artist.

Connectivity is another important aspect of the JVC LVT1356-005A. It offers multiple input options, allowing users to connect to various devices without hassle. This makes it a convenient choice for those who enjoy playing music from smartphones, tablets, or computers. Additionally, the model's compatibility with different audio formats enhances its appeal, making it suitable for versatile multimedia applications.

Durability is a key consideration in the design of the LVT1356-005A. Constructed with robust materials, it is built to withstand regular use, ensuring longevity. This reliability is particularly beneficial for professional users who require equipment that can endure the rigors of frequent transportation and setup.

The ease of use is further enhanced by user-friendly controls, which allow for quick adjustments to volume and settings. The intuitive layout ensures that even those new to audio equipment can operate the LVT1356-005A without confusion.

In summary, the JVC LVT1356-005A combines modern design, exceptional sound quality, versatile connectivity, and durability. These features make it an ideal choice for both casual listeners and audio professionals seeking reliable performance in their audio equipment.
Top Page Image Contents