
www.keysfitness.com
4
ASSEMBLY FOR UPRIGHT POST
Step 1:
Insert the upright post cover (I) into the upright tube
(D).
Step 2:
Connect the lower pulse wire (A4) with the upper pulse wire (A34). Also, connect the lower sensor wire (A36) with the upper sensor wire (A33).
Step 3:
Secure the upright post to the main frame (A1) using 3 allen screws (N7), 3 spring washers (N2) and 3 flat washers (N3).
Step 4:
Slide the upright tube cover (I) down to conceal tube connection.
D
N7 | I |
N2
N3
A4
A33 | A1 |
A34
A36
Use Tool
6mm
Note: Be careful not to pinch the sensor wire connection during assembly.
10 Assembly