Panasonic SC-PT 250 Troubleshooting guide continued, Sound abnormal or improper, Unit displays

Page 36
Troubleshooting guide (continued)

REFERENCE ENGLISH

RQTX0055

36

RQT8043

■ Sound abnormal or improper Troubleshooting guide (continued)

■ Sound abnormal or improper

Page

Sound is distorted.

• Noise may occur when playing WMA.

—

Effects do not work.

• Some audio effects do not work or have less effect with some discs.

—

 

• Dolby Pro Logic II does not work if you have changed the play speed.

—

Humming is heard during play.

• An AC mains lead or fl uorescent light is near the main unit. Keep other

—

 

appliances and cables away from the main unit.

 

No sound.

• There may be a slight pause in sound when you change the play speed.

—

 

• Audio may not be output due to how fi les were created.

 

 

—

 

 

 

 

 

■Picture abnormal or unviewable

The picture on the television is

• The unit and television are using different video systems.

—

not displayed correctly or

∗1 Use a multi-system or NTSC television.

 

disappears.

∗2 Use a multi-system or PAL television.

 

 

 

 

 

 

 

 

• The system used on the disc does not match your television.

 

 

 

 

– PAL discs cannot be correctly viewed on an NTSC television.

—

 

 

 

– This unit can convert NTSC signals to PAL 60 for viewing on a PAL

24

 

 

 

television (“NTSC DISC OUT” in “VIDEO” tab).

 

 

 

 

• Ensure that the unit is connected directly to the television, and is not

32

 

 

 

connected through a video cassette recorder.

 

 

 

 

• Mobile telephone chargers can cause some disturbance.

—

 

 

 

• If you are using an indoor television antenna, change to an outdoor antenna.

—

 

 

 

• The television antenna wire is too close to the unit. Move it away from the

—

 

 

 

unit.

 

 

 

 

• Change “SOURCE SELECT” in Functions menu.

 

 

22

 

 

 

 

 

 

 

Picture stops.

 

 

• Picture may stop if the DivX fi les are greater then 2 GB.

—

 

 

 

 

 

 

 

 

 

Picture size does not fit the

• Change “TV ASPECT” in the “VIDEO” tab.

24

screen.

• Use the television to change the aspect.

—

 

 

 

• Change the zoom setting. (“ZOOM” in Functions menu)

22

Menu is not displayed correctly.

• Restore the zoom ratio to “NORMAL”. (“ZOOM” in Functions menu)

22

Auto zoom function does not

• Turn off television zoom function.

—

work well.

• Zoom function may not work well, especially in dark scenes and may not

—

 

 

 

work depending on the type of disc.

 

When playing PAL disc, picture

• Set “TRANSFER MODE” in Functions menu to “AUTO”.

22

is distorted.

 

 

 

 

■ Progressive video

Pictures not in progressive

• Select “PROGRESSIVE” in “VIDEO OUT (I/P)” in the “VIDEO” tab.

24

output.

• The unit’s VIDEO OUT terminal outputs the interlaced signal even if “PRG” is

11

 

displayed.

 

■Unit displays

The display is dark.

• Select “BRIGHT” in “FL DIMMER” in the “OTHERS” tab.

25

“NO PLAY”

• You inserted a disc the unit cannot play; insert one it can.

13

 

 

• You inserted a blank disc.

—

 

 

• You inserted a disc that has not been fi nalized.

—

“NO DISC”

• You have not inserted a disc; insert one.

—

 

 

• You have not inserted the disc correctly; insert it correctly.

16

“OVER CURRENT ERROR”

• The USB device is drawing too much power. Switch to DVD/CD mode,

—

 

 

remove the USB and turn the unit off.

 

“F61”

• Check and correct the speaker cable connections.

10

 

 

If this does not fi x the problem, consult the dealer.

 

“F76”

• There is a power supply problem. Consult the dealer.

—

“DVD U11”

• Disc may be dirty. Wipe it clean.

26

“ERROR”

• Incorrect operation performed. Read the instructions and try again.

—

“DVD H & &”

• Trouble may have occurred. The numbers following “H” and “F” depend on

—

“DVD F & & &”

the status of the unit. Turn the unit off and then back on. Alternatively, turn the

 

& stands for a number.

unit off, disconnect the AC mains lead, and then reconnect it.

—

 

 

• If the service numbers fail to clear, note the service number and contact a

 

 

 

 

 

qualifi ed service person.

 

“REMOTE 1” or “REMOTE 2”

• Match the modes on the main unit and remote control. Depending on

34

 

 

the number being displayed (“1” or “2”), press and hold [ENTER] and the

 

 

 

corresponding numbered button ([1] or [2]) for at least 2 seconds.

 

1

 

 

 

 

For Southeast Asia and Thailand

 

 

 

 

 

 

2

For the Middle East, South Africa, Saudi Arabia, Kuwait and Continental Europe

 

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Model No. SC-PT250 E GCSGCTGCGSRQTX0055-1B Operating InstructionsCaution for AC Mains Lead Thank you for purchasing this productGETTING STARTED ENGLISH SystemENGLISH GETTING STARTEDRQTX0055 RQT8043Safety precautions PlacementService VoltageTable of contents GETTING STARTEDDISC OPERATIONS OTHER OPERATIONSAccessories Preparing the remote control1 Remote control 2 Remote control batteriesPlacement of speakers Setup exampleGETTING STARTED ENGLISH Use only supplied speakersSpeaker assembly GETTING STARTED ENGLISHPreparation 2 Front speakersSpeaker installation options ENGLISHPreventing the speakers from falling Attaching to a wallSimple setup Connect to the power supplyMaking the connections Connect to the antennaConnect to the various television terminals Using the SCART AV terminalUsing the COMPONENT VIDEO OUT terminals Television with SCART terminalPerforming QUICK SETUP 2 Select “DVD/ CD” 1 Switch on the main unit3 Shows the QUICK SETUP screen 4 Follow the messages and make the settingDisc information Discs that can be playedCommercial discs Video systemsOverview of controls Main unitStandby/on switch y/I AC supply indicator AC INRemote control To cancelDVD DVD/CD FM EXT-IN USB 33, AV 2 34, AUX 32, MUSIC PUsing the main unit 1 Power on 4 Adjust the volume and start playbackUsing the remote control Disc - Basic playENGLISH StopSearch during play Advanced play Displaying current playback conditionProgram and Random play ENGLISHPlaying data discs using navigation menus Playing data discsPlaying RAM and DVD-R/-RW DVD-VRdiscs 3 To start play from the selected contentUsing on-screenmenus 3 Make the settings2 Select the item 1 Display the functionsFunctions menu continued DISC OPERATIONS ENGLISH1 ENG S P E EDUsing on-screenmenus continued Functions menu continuedDISC OPERATIONS ENGLISH NORMALChanging the player settings 4 Make the settings1 Display the MAIN menu 2 Select the tabChanging the player settings continued MAIN menu continued“VIDEO” tab “AUDIO” tabChanging the delay time of the speakers To enter the speaker settingEffective when playing multi-channelaudio To exit the setupTips for making data discs Changing the player settings continuedDisc handling precautions To clean discsAbout DivX VOD content Display the unit’s registration codeDISC OPERATIONS ENGLISH Using the radio Manual tuningSelecting the preset channels Automatic presettingUsing sound effects Adjusting the amount of bass Subwoofer levelEnhancing the stereo sound Dolby Pro Logic Enhancing the stereo sound Super SurroundUsing sound effects continued 1 Lower the microphone volume to “MIN”Enjoying karaoke 2 Connect the microphone to the jackMic volume adjustment Vocal cancel functionEnjoying karaoke with other sources Adding an echo effectOperating other equipment Optional antenna connectionOptional USB connection and operation 3 Adjust the volume of the main unitPreparation 2 To select “MUSIC P.”Changing the main unit and remote control Operating the televisionTo switch the television on or off To switch the television’s video input modeTroubleshooting guide PowerNo power switched to the standby modeTroubleshooting guide continued When playing PAL disc, picture“OVER CURRENT ERROR” “ERROR”Language code list “ERROR”The USB drive or its contents cannot be read Television displaysGlossary DecoderDivX Dolby DigitalSpecifications RMS Output Power Dolby Digital ModeRMS Output Power Dolby Digital Mode PMPO output powerMaintenance Specifications continuedUSB port power Input power IEC
Top Page Image Contents