3a. Mount Foot Pedals (14) to Pedal Arm (10) with Screws (15), Washers (16) and Nylon locknut (17).
3a
3.Slide the Bolts (12, 13) through the hole of the Foot Pedal Mount Tubes (10) and screw into the Crank (7). Must screw on counter clockwise. Secure both Bolts (12, 13) with Nuts (6a, 6b). Do not forget to place the Plastic Spacer (9) in first.(See 3a above).
3
4.Connect the Monitor Cable (51) in the Handlebar Post (38) to the Monitor Cable (50) in the Main Frame (1). Slide the Tension Cord (53) up into the Handlebar Post (38). Connect the Handlebar Post (38) to the Main Frame (1) using Screws (52) and Washers (27)
4
8 | 9 |