JVC SP-UXG45 manual Listening to the Radio, To select the band FM or AM, To tune in to a station

Listening to the Radio

To select the AM tuner interval spacing	Remote
	ONLY

Some countries space AM stations 9 kHz spacing, and other countries use 10 kHz spacing.

You can change the AM tuner intervals while the System is on stand by.

1

2sec.

•Current interval setting appears on the display.

2Select the interval spacing while current setting appears on the display.

9

0

	Remote
If the received FM station is hard to listen	ONLY

FM MODE MONO

STEREO

MONO: Reception will improve though stereo effect is lost. MONO indicator lights up.

STEREO: Normally select this. Stereo effect will be resumed.

To preset the stations	Remote
	ONLY

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

2Activate the preset number entry mode.

SET/RESUME

•Finish the following process while the indication on the display is flashing.

3Select a preset number for the station you store.

English

To select the band (FM or AM)

FM AM

You can also carry out the same operation using the FM/AM button on the System.

1 2 3

4 5 6

7 8 9

0 10

Examples:

To select preset number 5, press 5.

To select preset number 15, press

10 → 1 → 5.

To select preset number 30, press 10 → 3 → 0.

To tune in to a station

While FM or AM is selected...

Remote control:	Main unit:
1 sec.		1 sec.
		DOWN	UP

•You can also use the PRESET UP/PRESET DOWN buttons.

4Store the station.

SET/RESUME

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

•When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

memo

•If you preset a station set to MONO, the station is stored with the MONO setting.

10