JVC SP-UXG45, LVT1520-005B, CA-UXG45 manual Maintenance, Specifications

Page 32

Maintenance

To get the best performance of the System, keep your discs, and mechanism clean.

Handling discs

•When removing the disc from its case, hold it at the edge while pressing the center hole lightly.

•Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

•Be careful not to scratch the surface of the disc.

•Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center to edge.

Handling cassette tapes

•If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotate it.

–If the tape is loose, it may get stretched, cut, or caught in the cassette.

•Be careful not to touch the tape surface.

•Avoid the following places to store the tape—in dusty places, in direct sunlight or heat, in moist areas, on a TV or speaker, or near a magnet.

To keep the best recording and playback sound quality

•Use a cotton swab moistened with alcohol to clean the heads, capstans, and pinch rollers.

•Use a head demagnetizer (available at electronics and audio shops) to demagnetize the heads (when the System turned off).

Cleaning the System

•Stains should be wiped off with a soft cloth. If the System is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the System may deteriorate in quality, it become damaged or get its paint peeled off, be careful about the following:

–DO NOT wipe it with a hard cloth.

–DO NOT wipe it strongly.

–DO NOT wipe it with thinner or benzine.

–DO NOT apply any volatile substance such as insecticides to it.

–DO NOT allow any rubber or plastic to remain in contact for a long time.

Specifications

Amplifier section

Output Power:

80 W per channel, min. RMS,

 

driven into 6 Ω at 1 kHz with no

 

more than 10% total harmonic

 

distortion. (IEC268-3)

Speakers/Impedance:

6 Ω – 16 Ω

Audio Input

AUX

 

Input sensitivity/Impedance:

 

LEVEL1: 150 mV/47 kΩ

 

LEVEL2: 500 mV/47 kΩ

 

USB: Ver.1.1

Tuner section

FM tuning range:

87.50 MHz – 108.00 MHz

AM (MW) tuning range: 531 kHz – 1 710 kHz (at 9 kHz)

 

530 kHz – 1 710 kHz (at 10 kHz)

CD player section

 

Dynamic range:

85 dB

Signal-to-noise ratio:

85 dB

Wow and flutter:

Immeasurable

Cassette deck section

Frequency response

 

Normal (type I):

60 Hz – 14 000 Hz

Wow and flutter:

0.15% (WRMS)

General

 

Power requirement:

AC 110 V – 127 V / 220 V – 240 V

 

(adjustable with the voltage selector),

 

50Hz/60Hz

Power consumption:

150 W (at operation)

 

22 W (on standby)

1.0W (standby and on display off)

Dimensions (approx.): 175 mm ⋅ 246 mm ⋅ 415 mm

 

(W/H/D)

Mass (approx.):

6.2 kg

Speakers

Type:

2-way Bass reflex

Speaker units:

Woofer: 12 cm cone ⋅ 1

 

Tweeter: 4 cm cone ⋅ 1

Impedance:

6 Ω

Dimensions (approx.):

145 mm ⋅ 246 mm ⋅ 212 mm

 

(W/H/D)

Mass (approx.):

2.2 kg each

Supplied Accessories

See page 4.

Design and specifications are subject to change without notice.

English

28

Page 31 Page 33
Image 32
Page 31 Page 33
Contents Instructions Page About the cooling fan Important for Laser Products Contents Precautions IntroductionBriefly and repeatedly until an option How to Read This ManualBriefly Unpack Prepare the Remote ControlGetting Started Hook Up For better FM/AM receptionFM antenna supplied Adjusting the voltage selector To connect the speaker cordsBefore Operating the System Indications on the main displayFor private listening Daily Operations-PlaybackTo turn off stand by the System To tune in to a station Listening to the RadioTo select the band FM or AM Playing Back a Disc Playing Back from the USB Memory or Digital Audio PlayerTo select a track/group To locate a particular portionFor MP3 playback To connect the USB Memory or DAPResume Play for Audio CD/MP3/USB Memory/DAP To adjust the sound input level from other equipment Playing Back a TapePlaying Back Other Equipment To insert a tapeWhen QP Link is activated Quick Portable Link QP LinkAdjusting the Volume Adjusting the SoundTo adjust the tone-BASS/TREBLE To emphasize the sound-SOUND TurboSetting the Clock Remote Turning Off the Power Automatically onlyTo turn off the System after playback is over- Auto Standby Specify the time in minutesProgramming the Playing Order Before starting playback, press ProgramSelect tracks you want for Program Play Repeat to program the other tracks Start playbackPlaying at Random-Random Play For CD/MP3TRACK mode For MP3 Group modeDuring Program Play During Random PlayAdvanced Tape Operations Recording on a TapeInsert a recordable cassette Select and start playing the source-FM, AM, CD, USB, or AUXSynchronized Disc Recording To record the entire discWhen the off-time comes Timer OperationsWhen the on-time comes Set the volume Select preset station numberTo turn off the Timer after its setting is done Select the Timer you want to cancelTurn off the selected Timer To turn on the Timer again, repeat the above stepsDaily Operations-Sound & Other Adjustments Additional InformationAdvanced Disc/USB Memory/DAP Operations Advanced Tape Operations see pages 21 toTroubleshooting Maintenance SpecificationsParts Index 16, 2313, 18 UX-G45 Micro Component System ¡ATENCION PRECAUCIÓN--Botón standby/on Front Important for Laser Products Contents Introduction If no number is inside the arrow Getting Started Hook Up 240V To connect the speaker cords Before Operating the System Resume Display MP3 Mode Preset UP If the received FM station is hard to listen Preset Down Playing Back from the USB Memory or Digital Audio PlayerGR Group indicator Total group number Total track number Playing Back a Tape Quick Portable Link QP Link Bass Treble Bass Treble Setting the Clock Remote Turning Off the Power Twice →1 →2 →5 To erase the last step To erase the entire Program Playing Repeatedly-Repeat Play FM/AM Tape USB Memory AUX Adhesive tape Required Daily 1 Timer Daily 2 Timer Daily 3 Timer To turn off the Timer after its setting is done Additional Information AC power cord is not plugged Child Lock is in use see CD player section 10-12 10, 16 13, 18 10-12 Importante para la línea de la red CA

SP-UXG45, CA-UXG45, LVT1520-005B specifications

The JVC LVT1520-005B, CA-UXG45, and SP-UXG45 are a series of audio components that exemplify JVC's commitment to quality sound and advanced technology. These models are designed for optimal performance in compact home audio systems, appealing to both casual listeners and audiophiles alike.

The JVC CA-UXG45 is a compact component system that offers versatility in playback options. It features a built-in CD player, USB ports, and Bluetooth connectivity, allowing users to enjoy a variety of audio sources effortlessly. The unit is capable of playing CDs, CD-R/RW, and MP3 files, making it an excellent choice for those with extensive music collections. The Bluetooth feature enables wireless streaming from smartphones and tablets, enhancing convenience and flexibility in how music is enjoyed.

An important characteristic of the CA-UXG45 is its powerful amplification. With 25 watts per channel output, this audio system can fill a room with rich, clear sound. The inclusion of a built-in equalizer allows users to customize their auditory experience, adjusting the sound according to personal preferences or the acoustics of the space.

Complementing the CA-UXG45 are the SP-UXG45 speakers, which are designed to deliver balanced and dynamic sound reproduction. These speakers incorporate advanced driver technology that enhances bass response while maintaining clarity in the mid and high frequencies. The compact design of the SP-UXG45 speakers makes them easy to place in any room, while their stylish appearance adds a touch of elegance to home décor.

Another significant technology featured in this system is the Digital Amplification System, which ensures high energy efficiency and low distortion. This technology not only contributes to the overall sound quality but also reduces power consumption, aligning with modern eco-friendly standards.

In addition, the LVT1520-005B remote control makes it simple to navigate through various functions and settings, providing a user-friendly experience. With its compact size and impressive sound quality, the JVC CA-UXG45 and SP-UXG45 combination is ideal for anyone looking to enhance their home audio experience without sacrificing space.

Overall, the JVC LVT1520-005B, CA-UXG45, and SP-UXG45 represent a harmonious blend of innovation, design, and functionality, creating an engaging audio experience perfect for any home environment. Whether hosting a gathering or enjoying a quiet evening, this audio system stands out as a reliable choice for superior sound enjoyment.
Top Page Image Contents