JVC CA-UXG45, LVT1520-005B, SP-UXG45 manual CD player section

Page 67

Maintenance

To get the best performance of the System, keep your discs, and mechanism clean.

Handling discs

•When removing the disc from its case, hold it at the edge while pressing the center hole lightly.

•Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

•Be careful not to scratch the surface of the disc.

•Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the disc:

Wipe the disc with a soft cloth in a straight line from center to edge.

Handling cassette tapes

•If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotate it.

–If the tape is loose, it may get stretched, cut, or caught in the cassette.

•Be careful not to touch the tape surface.

•Avoid the following places to store the tape—in dusty places, in direct sunlight or heat, in moist areas, on a TV or speaker, or near a magnet.

To keep the best recording and playback sound quality

•Use a cotton swab moistened with alcohol to clean the heads, capstans, and pinch rollers.

•Use a head demagnetizer (available at electronics and audio shops) to demagnetize the heads (when the System turned off).

Cleaning the System

•Stains should be wiped off with a soft cloth. If the System is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the System may deteriorate in quality, it become damaged or get its paint peeled off, be careful about the following:

–DO NOT wipe it with a hard cloth.

–DO NOT wipe it strongly.

–DO NOT wipe it with thinner or benzine.

–DO NOT apply any volatile substance such as insecticides to it.

–DO NOT allow any rubber or plastic to remain in contact for a long time.

Specifications

Amplifier section

Output Power:

80 W per channel, min. RMS,

 

driven into 6 Ω at 1 kHz with no

 

more than 10% total harmonic

 

distortion. (IEC268-3)

Speakers/Impedance:

6 Ω – 16 Ω

Audio Input

AUX

 

Input sensitivity/Impedance:

 

LEVEL1: 150 mV/47 kΩ

 

LEVEL2: 500 mV/47 kΩ

 

USB: Ver.1.1

Tuner section

FM tuning range:

87.50 MHz – 108.00 MHz

AM (MW) tuning range: 530 kHz – 1 710 kHz (at 10 kHz)

 

531 kHz – 1 710 kHz (at 9 kHz)

CD player section

 

Dynamic range:

85 dB

Signal-to-noise ratio:

85 dB

Wow and flutter:

Immeasurable

Cassette deck section

Frequency response

 

Normal (type I):

60 Hz – 14 000 Hz

Wow and flutter:

0.15% (WRMS)

General

 

Power requirement:

AC 110 V – 127 V / 220 V – 240 V

 

(adjustable with the voltage selector),

 

50Hz/60Hz

Power consumption:

150 W (at operation)

 

22 W (on standby)

1.0W (standby and on display off)

Dimensions (approx.): 175 mm ⋅ 246 mm ⋅ 415 mm

 

(W/H/D)

Mass (approx.):

6.2 kg

Speakers

Type:

2-way Bass reflex

Speaker units:

Woofer: 12 cm cone ⋅ 1

 

Tweeter: 4 cm cone ⋅ 1

Impedance:

6 Ω

Dimensions (approx.):

145 mm ⋅ 246 mm ⋅ 212 mm

 

(W/H/D)

Mass (approx.):

2.2 kg each

Supplied Accessories

See page 4.

Design and specifications are subject to change without notice.

English

28

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Instructions Page About the cooling fan Important for Laser Products Contents Introduction PrecautionsBriefly How to Read This ManualBriefly and repeatedly until an option Getting Started Prepare the Remote ControlUnpack For better FM/AM reception Hook UpFM antenna supplied To connect the speaker cords Adjusting the voltage selectorIndications on the main display Before Operating the SystemTo turn off stand by the System Daily Operations-PlaybackFor private listening To select the band FM or AM Listening to the RadioTo tune in to a station To locate a particular portion Playing Back a DiscPlaying Back from the USB Memory or Digital Audio Player To select a track/groupResume Play for Audio CD/MP3/USB Memory/DAP To connect the USB Memory or DAPFor MP3 playback To insert a tape To adjust the sound input level from other equipmentPlaying Back a Tape Playing Back Other EquipmentQuick Portable Link QP Link When QP Link is activatedTo emphasize the sound-SOUND Turbo Adjusting the VolumeAdjusting the Sound To adjust the tone-BASS/TREBLESetting the Clock Remote Specify the time in minutes Turning Off the PowerAutomatically only To turn off the System after playback is over- Auto StandbyRepeat to program the other tracks Start playback Programming the Playing OrderBefore starting playback, press Program Select tracks you want for Program PlayPlaying at Random-Random Play During Random Play For CD/MP3TRACK modeFor MP3 Group mode During Program PlaySelect and start playing the source-FM, AM, CD, USB, or AUX Advanced Tape OperationsRecording on a Tape Insert a recordable cassetteTo record the entire disc Synchronized Disc RecordingWhen the on-time comes Timer OperationsWhen the off-time comes Select preset station number Set the volumeTo turn on the Timer again, repeat the above steps To turn off the Timer after its setting is doneSelect the Timer you want to cancel Turn off the selected TimerAdvanced Tape Operations see pages 21 to Daily Operations-Sound & Other AdjustmentsAdditional Information Advanced Disc/USB Memory/DAP OperationsTroubleshooting Specifications Maintenance16, 23 Parts Index13, 18 UX-G45 Micro Component System ¡ATENCION PRECAUCIÓN--Botón standby/on Front Important for Laser Products Contents Introduction If no number is inside the arrow Getting Started Hook Up 240V To connect the speaker cords Before Operating the System Resume Display MP3 Mode Preset UP If the received FM station is hard to listen Playing Back from the USB Memory or Digital Audio Player Preset DownGR Group indicator Total group number Total track number Playing Back a Tape Quick Portable Link QP Link Bass Treble Bass Treble Setting the Clock Remote Turning Off the Power Twice →1 →2 →5 To erase the last step To erase the entire Program Playing Repeatedly-Repeat Play FM/AM Tape USB Memory AUX Adhesive tape Required Daily 1 Timer Daily 2 Timer Daily 3 Timer To turn off the Timer after its setting is done Additional Information AC power cord is not plugged Child Lock is in use see CD player section 10-12 10, 16 13, 18 10-12 Importante para la línea de la red CA

SP-UXG45, CA-UXG45, LVT1520-005B specifications

The JVC LVT1520-005B, CA-UXG45, and SP-UXG45 are a series of audio components that exemplify JVC's commitment to quality sound and advanced technology. These models are designed for optimal performance in compact home audio systems, appealing to both casual listeners and audiophiles alike.

The JVC CA-UXG45 is a compact component system that offers versatility in playback options. It features a built-in CD player, USB ports, and Bluetooth connectivity, allowing users to enjoy a variety of audio sources effortlessly. The unit is capable of playing CDs, CD-R/RW, and MP3 files, making it an excellent choice for those with extensive music collections. The Bluetooth feature enables wireless streaming from smartphones and tablets, enhancing convenience and flexibility in how music is enjoyed.

An important characteristic of the CA-UXG45 is its powerful amplification. With 25 watts per channel output, this audio system can fill a room with rich, clear sound. The inclusion of a built-in equalizer allows users to customize their auditory experience, adjusting the sound according to personal preferences or the acoustics of the space.

Complementing the CA-UXG45 are the SP-UXG45 speakers, which are designed to deliver balanced and dynamic sound reproduction. These speakers incorporate advanced driver technology that enhances bass response while maintaining clarity in the mid and high frequencies. The compact design of the SP-UXG45 speakers makes them easy to place in any room, while their stylish appearance adds a touch of elegance to home décor.

Another significant technology featured in this system is the Digital Amplification System, which ensures high energy efficiency and low distortion. This technology not only contributes to the overall sound quality but also reduces power consumption, aligning with modern eco-friendly standards.

In addition, the LVT1520-005B remote control makes it simple to navigate through various functions and settings, providing a user-friendly experience. With its compact size and impressive sound quality, the JVC CA-UXG45 and SP-UXG45 combination is ideal for anyone looking to enhance their home audio experience without sacrificing space.

Overall, the JVC LVT1520-005B, CA-UXG45, and SP-UXG45 represent a harmonious blend of innovation, design, and functionality, creating an engaging audio experience perfect for any home environment. Whether hosting a gathering or enjoying a quiet evening, this audio system stands out as a reliable choice for superior sound enjoyment.
Top Page Image Contents