IMPORTANT! How To Zero Torque

Leveling the bike

Once the above assembly instructions have been followed, move the bike to where it will be used and level it properly. To level the bike, adjust the leveling feet underneath the stabilizers until there is no rocking or movement of the bike.

Leveler Lock

You can secure the feet by tightening the leveler locks.

The torque must be zeroed to ensure that the console displays the most accurate power information. If the instantaneous power is positive or negative, the torque needs to be zeroed. These operations must be done with NO tension on the chain or with NO force being placed on the pedals. Also, the transmission icon must be illuminated.

To zero torque, ﬁrst ensure the transmission icon is showing. Then press [DOWN ARROW] to move the cursor to [WATTS]. Press [SELECT] to change to [INCH-LBS]. Then hold down [SELECT] again until “0” is shown (about 10 seconds). Press [SELECT] to return to [WATTS]. The torque value will now read zero.