Bowflex Xceed Plus manual Install Seat Back Pad, Upper Lat Tower Assembly

Page 15

Assembly Guide

Step 13 Install Seat Back Pad

Note: The back of the Seat Back Pad has two pairs of holes. .Select the appropriate . set based on your height..

Parts:

Seat Back Pad

Main Assembly

Hardware:

• 2Button Head Screws (5/16" X 2 1/2")

• 2Washers (5/16")

Tool: 3/16" Hex Wrench

13-1Position Seat Back Pad against the . Seat Support Rail and align the . screw holes for your height with . those on the Seat Support Rail..

13-2Secure Seat Back Pad to the Seat Support Rail using screws and . washers as shown..

Seat Back Pad

Button

Flat Head

Washers Screws

Step 14 Upper Lat Tower Assembly

Parts:

Upper Lat Tower

Lat Cross Bar

Hardware:

2 Button Head Screws (3/8" X 3")

2 Washers (3/8")

2 Nylock Nuts (3/8”)

Tool: 7/32" Hex Wrench and Adjustable Wrench

14-1Align the two holes on the Lat Cross Bar with those on the Upper Lat Tower as shown. .

14-2Secure using washers and screws as shown...

Flat Washers

Upper Lat Tower

Lat Cross Bar

Button Head

 

 

Screws

Bowflex XceedPlus Assembly Manual

13

Image 15
Contents Assembly Manual Table of Contents Product Specifications Specifications / ApprovalsImportant Safety Instructions Important Safety PrecautionsBefore You Assemble Before You BeginLeg Extension Attachment Parts Reference GuideLeg Extension Parts Tools you will need Hardware GuideAssembly Guide Base Frame AssemblyLower Lat Tower Assembly Install Seat Support Rail Install Lower Lat Tower AssemblyInstall Pulley Arms Install Squat Pulley Frame Secure Pulley Arms  Install Slider PulleysLeg Extension Assembly Seat AssemblyInstall Seat Assembly Install Optional Leg Extension AssemblyUpper Lat Tower Assembly Install Seat Back PadTighten Hardware Install Upper Lat Tower Assembly Connect Cables  Final Inspection Offices in the United States Important Contact Numbers