Bowflex Xceed Plus manual Install Upper Lat Tower Assembly, Tighten Hardware

Page 16

Assembly Guide

Step 15 Install Upper Lat Tower Assembly

Parts:

• Upper Lat Tower Assembly

• Main Assembly

Hardware (1:1):

• 6Button Head Screws (3/8" X 3/4")

• 6Washers (3/8")

Tool: 7/32" Hex Wrench

15-1Position the Upper Lat Tower Assembly . over the Lower Lat Tower Assembly..

15-2Slide the Upper Lat Tower onto the . Lower Lat Tower and secure with screws . and washers as shown..

Upper Lat Tower

Flat

2ODS NOT SHOWN

FOR CLARITY

Washers

Button Head

Screws

Flat

Washers

Button Head

Screws

Lower Lat Tower

Step 16 Tighten Hardware

16-1Carefully go over the entire Bowflex Xceed™ Plus home gym and tighten all hardware before proceeding to the next step. .Pay close attention to the hardware installed in Steps 1, 3, 4, and 6. .

14Bowflex Xceed™ Plus Assembly Manual

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Assembly Manual Table of Contents Specifications / Approvals Product SpecificationsImportant Safety Precautions Important Safety InstructionsBefore You Begin Before You AssembleParts Reference Guide Leg Extension AttachmentLeg Extension Parts Hardware Guide Tools you will needBase Frame Assembly Assembly GuideLower Lat Tower Assembly Install Lower Lat Tower Assembly Install Seat Support RailInstall Squat Pulley Frame Install Pulley Arms Install Slider Pulleys  Secure Pulley ArmsSeat Assembly Leg Extension AssemblyInstall Optional Leg Extension Assembly Install Seat AssemblyInstall Seat Back Pad Upper Lat Tower AssemblyInstall Upper Lat Tower Assembly Tighten Hardware Connect Cables  Final Inspection Important Contact Numbers Offices in the United States
Top Page Image Contents