Bowflex PR3000 manual Assembly, Assemble the Base

Page 6

Assembly

Step 1: Assemble the Base

Parts

•Base Platform (#19)

•Right Frame Rail (#20)

•Left Frame Rail (#21)

•Rear Cross Bar (#22)

•Central Support (#23)

Hardware

•(4) 3/8” x 3/4” Hex Head Bolts (#1)

•(4) 3/8” x 2 3/4” Hex Head Bolts (#16)

•(12) 3/8” Washers (#5)

•(4) 3/8” Nylock Nuts (#7)

Tools

•Adjustable Wrench (not included)

1-1Put the Base Assembly parts on the floor.

1-2Align the bolt holes on the Right and Left Frame Rails with the holes in the Base Platform, Rear Cross Bar and the Central Support.

1-3Install the hardware, but do not tighten the bolts.

1-4Tighten all hardware.

22 1

7 20

23

19

5	21

16

6

Assembly Manual

Image 6

Contents PR3000 Home Gym Table of Contents Important Safety Instructions Before using this equipment, obey the following warningsHardware Parts Item # Qty DescriptionAssembly Assemble the BaseAttach the Rod Pack Attach the Lower Lat Assembly to the Base Assembly Attach the Seat Support Rail Attach the Pulley Arms Adjustable Wrench not included Attach the Seat Bottom to the Seat BackboneAttach the Leg Extension Assembly Attach the Seat Back Attach the Lat Crossbar with Pulleys to the Upper Lat Tower Attach the Rear Lat Cross Bar Attach the Upper Lat Tower Assembly to the Base Assembly Attach the Lat Pulley Housing Cable and Pulley Routing the Rear Pulleys Assembly Assembly Leg Press Extension Cable Routing Final InspectionAssembly Manual Contacts United StatesNautilus Bowflex Schwinn Fitness StairMaster Universal