Bowflex Conquest manual Install Rod Pack, Parts Rod Pack Assembly from step Tools Allen wrench

Assembling Your Bowflex Conquest™Home Gym

Step 13 Install Rod Pack

Parts:

• Rod Pack Assembly (from step 12)

Tools:

• 3/16” Allen wrench

13-1 Position Rod Pack Assembly in the Rod Box with the 50lb. Rods closest to the Back Plates

13-2 Install and completely tighten hardware.

Hardware (1:1):

4 Button Head Screw (5/16” X 3/4”) 4 Washer (5/16”)

Step 14 Install Roller Pads
Parts:	End Cap
• Roller Pads
• 15 3/4” Roller Tube
• 16 1/2” Roller Tube
• End Caps

Back Plate	Rod Pack
	Assembly
5/16”Washer

5/16”x 3/4” Button Head

Screw Rod Box

Roller Pad

16 1/2” RollerTube

Upper Hole

14-1 Insert the 16 1/2” Roller Tube into the upper holes on the Leg Extension Assembly.

14-1 Insert the 15 3/4” Roller Tube into the lower holes on the Leg Extension Assembly.

14-2 Slide the Roller Pads onto the Roller Tubes. 14-3 Insert the End Caps into the Roller Tubes.

15 3/4” RollerTube

Leg Extension Assembly

12