Bowflex Conquest manual Tools You Will Need

Page 3

Tools You Will Need

Hex Wrenches Are Provided in the Box

These Tools Are Not Provided in the Box

3/16” Hex Key for 5/16” Button Head Screws:

Wrench (9/16”) or Adjustable Wrench

(not provided):

7/32” Hex Key for 3/8” Button Head Screws:

 

 

Phillips Head Screwdriver

 

(not provided) :

* Specifications subject to change without notice.

Hardware Chart (1:1 Scale)

Qty 2 Button Head Screws 3/8” X 5”

Qty 1 Button Head Screws 3/8” X 4 1/4”

Qty 2 Button Head Screws 3/8” X 4”

Qty 2 Button Head Screws 3/8” X 3 1/4”

Qty 2 Button Head Screws 3/8” X 3”

Qty 2 Button Head Screws 3/8” X 2 3/4”

Qty 2 Button Head Screws 3/8” X 2 1/2”

Qty 14 Button Head Screws 3/8” X 3/4”

Qty 37 Washer 3/8”

Qty 8 Washers 5/16”

Qty 10

Hex Nut 3/8”

Qty 3 Washers 1/4”

Qty 8 Button Head Screws 5/16” X 3/4”

Qty 3 Self Tapping Screws #10 x 1”

Qty 4 Self Tapping Screws #10 x 3/4”



Image 3
Contents Assembly Instructions Table of Contents Tools You Will Need Bowflex Conquest Home Gym Parts List Bowflex Conquest Home Gym Parts List Attach Stabilizers to Crossbar Attach Squat PlatformTo Base AssemblyAttach LowerTower to Base Assembly Parts Chest Bar Tools Allen wrench Wrench or AdjustableAttach Chest Bar to LowerTower Attach Seat to Seat Roller Bracket Attach Front Stabilizer to Leg Extension AssemblyAttach Seat Rail Tools Allen wrench Wrench or Adjustable WrenchInstall and completely tighten HardwareAttach UpperTower Assembly from step Attach Lat Crossbar to UpperTowerParts Upper Tower Lat Crossbar Tools Allen wrench Attach Rod Box Mount Face PlateRoller Pads 15 3/4 Roller Tube 16 1/2 Roller Tube End Caps Install Rod PackParts Rod Pack Assembly from step Tools Allen wrench Install Roller PadsInstall Bench Parts BenchRoute the Rod Cables Final Inspection Store the Lat CablesImportant Contact Numbers