Gold's Gym GGEL62707.0 manual

Page 8

7.Attach two Pedal Posts (16) to the Left Pedal Arm (14) with two M8 x 16mm Button Screws (84) and two M8 Washers (53).

Attach the other Pedal Posts (not shown) to the Right Pedal Arm (75) in the same way.

8.Attach one of the Pedals (12) to the Left Pedal Arm (14) with two M4 x 16mm Screws (66).

Attach the other Pedal (not shown) to the Right Pedal Arm (not shown) in the same way.

9.Identify the Left Handlebar (9), which is marked with a sticker. Insert the Left Handlebar into one of the Handlebar Legs (79); make sure that the Handlebar

Leg is turned so the hexagonal holes are on the indicated side. Attach the Left Handlebar with two M8 x 45mm Button Bolts (50) and two M8 Nylon Locknuts (46). Make sure that the Nylon Locknuts are inside of the hexagonal holes. Do not tighten the Button Bolts yet.

Assemble the Right Handlebar (not shown) and the other Handlebar Leg (not shown) in the same way.

8

	7
		84
	14	75
	14	53
		53
		16
	8
		12
	14
		66
		66
	9
		9
		46
		50
		Hexagonal
		Holes
		79

Image 8

Contents QUESTIONS? Model No. GGEL62707.0 Serial NoCall TOLL-FREE Mon.-Fri a.m.-6 p.m. MST Sat a.m.-4 p.m. MSTTable of Contents Important Precautions Before YOU Begin Assembly Wire harnesses do During this stepWire harnesses Harnesses do notThis step Make surePage Handlebar Leg must be able to pivot freely HOW to USE the Elliptical Exerciser HOW to Adjust the Stride of the ELLIPTI- CAL ExerciserHOW to USE the Manual Mode Diagram of the ConsoleFeatures of the Console Will automatically turn off Monitor your progress with the displayTurn on the fan if desired HOW to USE a Pulse Program Turn on the console. See on Select a pulse programBegin pedaling to start the program Monitor your progress with the display. See onHOW to USE a Preset Program Turn on the console. See on Select a preset programHandgrip Pulse Sensor Troubleshooting Maintenance and TroubleshootingBattery Replacement Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. GGEL62707.0 Qty DescriptionExploded Drawing A-Model No. GGEL62707.0 R0108A Exploded Drawing B-Model No. GGEL62707.0 R0108A Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty