JVC UX-Q1S, LVT1218-002A, CA-UXQ1W Recording Sound to MDs, Recording All Tracks from a CD to an MD

Page 26

Recording Sound to MDs

Main unit

Remote control

Recording All Tracks from a CD to an MD

1 Press , and then press .

•The CD is selected as the sound source and playback is stopped.

2 Insert an MD.

•Close the write protect knob on the MD

beforehand ( page 45).

3 Press to select the MDLP mode.

•Each time you press , the display toggles as follows.

:For standard stereo recording

(Maximum recording time is 80 minutes with an MD 80).

:For ×2 extended stereo recording (Maximum recording time is 160

minutes with an MD 80).

: For ×4 extended stereo recording (Maximum recording time is 320 minutes with an MD 80).

•As you change the MDLP mode

(SP→LP2→LP4), the sound quality also changes. When you want to record sound at the best possible quality, select the SP mode.

•When you use an MD car audio system, portable MD player or other MD player that is not compatible with the MDLP mode, select the SP mode.

4 Press to set group recording.

•Each time you press , the display toggles as follows.

:Activates group record- ing (factory setting).

: Cancels group recording.

•You can form or cancel a group after the

recording finishes. ( pages 34 and 37)

5 Press to select the recording speed.

•Each time you press , the display toggles as follows.

:High speed recording When CD playback time is 30 or more minutes, the recording speed is ×5, and when the playback time is less than 30 minutes, the recording speed is ×4.

: Normal speed recording

•Recorded sound quality is the same for both "HIGH SPEED" and "NORMAL REC".

•You cannot listen to the sound during high speed recording.

6 Press on the main unit.

Example display during recording:

MDLP mode

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remaining

This indicator

 

 

 

 

time for

lights up during

 

 

 

 

recording

high speed

This indicator

 

 

 

recording.

lights up during

 

 

 

 

 

 

group recording.

•When recording finishes, the color pattern of the display window and CD tray changes to the color pattern set in "MANUAL" to inform

you that recording has finished ( pages 12 and 13).

•When "HCMS CANNOT COPY" appears, refer to pages 44 and 46.

23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents UX-Q1S Important for Laser Products / 镭射产品的重要说明 Front view Table of Contents Listeners Etiquette Cleaning the Main UnitSuitable Locations for the Main Unit About CDs/CD-Rs/CD-RWsSupplied Accessories Special CautionsPreparation English Remote control operation Remote ControlInserting Batteries into the Remote Control Set up the AM loop antenna supplied Connecting the AntennasConnecting the AM antenna Connect the antenna cordConnecting the FM antenna Connecting the Speakers Demonstration display function Connecting Other EquipmentConnecting the Power Plug Resuming the demonstration displayDisplaying the clock while using the main unit Setting the ClockAdjusting the clock Basic OperationsAdjusting the Sound Quality Adjusting the VolumeSound Mode Turning On/Off the Main UnitPress On the main unit SoundChanging the Color Patterns For the Display Window CD Tray SoundPress to adjust the intensity of the component color Selecting a Radio Station Setting the AM Tuner SpacingListening to Radio Broadcasts Press to select FM or AMChanging the Display in the Display Window Storing Radio Stations PresetTuning In to a Preset Radio Station Entering radio station namesPlace a CD on the CD tray Listening to CDs/MDsListening to CDs Listening to MDs Insert an MDGroup Playback of an MD Canceling group playbackSpecifying the Track Direct Track Selection Repeat PlaybackRandom Playback Canceling the program playbackCanceling the random playback Erasing the all programmed tracksQuitting the title search Searching TitlesSearching another track or group title Enter the title you want to findInsert a cassette tape Press repeatedly to select the reverse modeListening to Cassette Tapes Listening to Other Equipment Each time you hold down , the display toggles as followsRecording Sound to MDs Recording All Tracks from a CD to an MDProgram Recording from a CD Quitting RecordingRecording Only One Track from a CD Changing the display in the displayInsert an MD for recording LP indicator settingSelect a sound source CD-R/CD-RW recordingEach time you press Display toggles as Example Display during FM radio broadcast recordingFollows Preventing recorded sound from being erased Press to select the reverse modeRecording Sound to Cassette Tapes IngRecording with No Blank Time between Tracks Recording Only One Track from a CD or MDProgram Recording from a CD or MD Changing the display in the display window during recordingGiving Editing Titles Giving Editing TitlesThings You Should Know about Editing Entering Titles Available CharactersPress repeatedly to select DIVIDE? Editing TracksDividing a Track into Two Tracks Divide Press to specify the dividing pointPress repeatedly to select MOVE? Joining Tracks JoinPress repeatedly to select JOIN? Track number to which you want to move the specified trackAll tracks, and then press Erasing a Track EraseErasing All Tracks ALL Example Erasing tune BPress repeatedly to select Form GR? Editing Tracks by GroupForming a Group Form GR Example Forming tune A, tune B and tune C into a groupPress repeatedly to select Entry GR? Adding a Track to a Group Entry GRDividing a Group into Two Groups Divide GR Press repeatedly to select Divide GR?Press repeatedly to select Join GR? Joining Groups Join GRMoving a Group Move GR Press repeatedly to select Move GR?Press repeatedly to select UNGROUP? Canceling a GroupCanceling a specified group Canceling all groups Ungr ALL Press repeatedly to select Ungr ALL?Tracks, and then press Erasing a Group Erase GRPress repeatedly to select Erase GR? Example Erasing groupRecording Timer Using the TimersSleep Timer Changing the sleep timer settingCanceling the recording timer Activating the recording timer againPrepare the sound source you want to play back Playback TimerPress Press or to adjust the playback volume Press or to select the sound source you want to play backCanceling auto standby Canceling the playback timer functionActivating the playback timer again Auto StandbyWhile holding down , press on the main unit Canceling the CD/MD ejection lockCD/MD Ejection Lock High Speed Copy Management System Hcms Restrictions on MDsSerial Copy Management System Scms Handling CDs/MDs/Cassette Tapes MD/CD Messages MD message Meaning Possible solutionCD message Meaning Possible solution Troubleshooting Problem Possible cause Possible solution ReferenceMicro component MD system UX-Q1S/UX-Q1W MD/CD receiver CA-UXQ1S/ CA-UXQ1WSpeaker SP-UXQ1S/SP-UXQ1W UX-Q1S/UX-Q1W Micro Component MD System

UX-Q1W, CA-UXQ1W, UX-Q1S, SP-UXQ1S, SP-UXQ1W specifications

The JVC LVT1218-002A, CA-UXQ1S, SP-UXQ1W, SP-UXQ1S, and UX-Q1S represent a versatile and modern audio system designed to deliver impressive sound quality and user-friendly features. This combination of components offers an ideal solution for music lovers seeking both performance and convenience in their home audio systems.

One of the standout features of the CA-UXQ1S is its compact size, making it suitable for various living spaces without sacrificing audio performance. It combines a multi-functional CD player, FM/AM tuner, and Bluetooth connectivity, allowing users to enjoy their favorite tracks from multiple sources. The integration of Bluetooth technology enables seamless streaming from smartphones, tablets, and other compatible devices, providing flexibility for users wishing to curate their playlists effortlessly.

The SP-UXQ1W and SP-UXQ1S speakers enhance the audio experience with their dynamic sound reproduction. These speakers are designed to deliver rich bass and clear mid ranges and highs, making them perfect for a range of musical genres, from classical to rock. The speakers are engineered with high-quality materials that ensure durability and optimum sound performance, reflecting JVC's commitment to audio excellence.

The UX-Q1S functions as the central hub of the system, sporting a user-friendly interface that simplifies navigation through various media options. Its sleek design complements modern decor while boasting a powerful output that fills rooms with impactful sound. Users can easily switch between listening to CDs, tuning into radio stations, or connecting via Bluetooth without hassle.

In addition to audio playback, the system supports USB playback, enabling direct access to music stored on flash drives. This feature further broadens the options available to users, accommodating diverse music libraries.

Overall, the JVC LVT1218-002A, CA-UXQ1S, SP-UXQ1W, SP-UXQ1S, and UX-Q1S combine cutting-edge technologies and important characteristics, providing an audio experience that is both user-friendly and highly enjoyable. Ideal for home listening, this system successfully marries style with functionality, placing it firmly in the spotlight for those who appreciate quality sound in a compact, all-in-one design. Whether hosting gatherings or enjoying a quiet evening, the JVC audio system is engineered to meet a variety of audio needs with ease and sophistication.
Top Page Image Contents