JVC UX-Q1W Quitting Recording, Recording Only One Track from a CD, Program Recording from a CD

Page 27

NOTE

•The recorded sound level is automatically adjusted.

•The CD rotates at high speed during high speed recording. Therefore, depending on the condition of the CD, the sound may be recorded improperly and affected by noise. If the sound is not recorded properly, select normal speed recording.

•The remaining time for recording differs depending on the selected MDLP mode.

•You cannot record sound while the repeat playback function is on. Starting the recording function automatically cancels repeat playback.

Quitting Recording

Press .

Recording Only One Track from a CD

Before proceeding to step 6 on page 23, start playback of the track you want to record.

•Pressing in step 6 returns playback to the beginning of the track, and only that track is recorded.

•When you select high speed recording, the speed used is ×4.

Recording the Second or Subsequent Track to the Last Track from a CD

Before proceeding to step 6 on page 23, select the starting track number

with or .

•When you select high speed recording for recording from the selected track, the speed used is ×4.

Program Recording from a CD

Before proceeding to step 5 on page 23, program the tracks you want to record ( page 18).

•Select normal speed recording ( step 5 on page 23).

When you select high speed recording and proceed to step 6, "CANNOT REC × 1 REC ONLY" appears in the display window and recording does not start.

 

Changing the display in the display

English

 

 

window during recording

 

Press

.

 

 

 

 

 

 

 

 

 

 

 

 

Sound

 

• Each time you press

, the display

 

 

 

toggles as follows.

Remaining CD

Recording

 

 

 

 

 

 

 

 

playback time of

 

 

Recording CD track number

the track

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remaining MD recording time

Recording CD track number

Recording MD track Recording MD group

numbernumber

(When tracks have not been recorded in a group, " - -" appears.)

Clock display

24

Page 26 Page 28
Image 27
Page 26 Page 28
Contents UX-Q1S Important for Laser Products / 镭射产品的重要说明 Front view Table of Contents About CDs/CD-Rs/CD-RWs Cleaning the Main UnitSuitable Locations for the Main Unit Listeners EtiquetteSpecial Cautions Supplied AccessoriesPreparation English Remote Control Inserting Batteries into the Remote ControlRemote control operation Connect the antenna cord Connecting the AntennasConnecting the AM antenna Set up the AM loop antenna suppliedConnecting the FM antenna Connecting the Speakers Resuming the demonstration display Connecting Other EquipmentConnecting the Power Plug Demonstration display functionBasic Operations Setting the ClockAdjusting the clock Displaying the clock while using the main unitTurning On/Off the Main Unit Adjusting the VolumeSound Mode Adjusting the Sound QualitySound SoundChanging the Color Patterns For the Display Window CD Tray Press On the main unitPress to adjust the intensity of the component color Press to select FM or AM Setting the AM Tuner SpacingListening to Radio Broadcasts Selecting a Radio StationEntering radio station names Storing Radio Stations PresetTuning In to a Preset Radio Station Changing the Display in the Display WindowListening to CDs/MDs Listening to CDsPlace a CD on the CD tray Insert an MD Listening to MDsRepeat Playback Canceling group playbackSpecifying the Track Direct Track Selection Group Playback of an MDErasing the all programmed tracks Canceling the program playbackCanceling the random playback Random PlaybackEnter the title you want to find Searching TitlesSearching another track or group title Quitting the title searchPress repeatedly to select the reverse mode Listening to Cassette TapesInsert a cassette tape Each time you hold down , the display toggles as follows Listening to Other EquipmentRecording All Tracks from a CD to an MD Recording Sound to MDsChanging the display in the display Quitting RecordingRecording Only One Track from a CD Program Recording from a CDCD-R/CD-RW recording LP indicator settingSelect a sound source Insert an MD for recordingExample Display during FM radio broadcast recording FollowsEach time you press Display toggles as Ing Press to select the reverse modeRecording Sound to Cassette Tapes Preventing recorded sound from being erasedChanging the display in the display window during recording Recording Only One Track from a CD or MDProgram Recording from a CD or MD Recording with No Blank Time between TracksGiving Editing Titles Things You Should Know about EditingGiving Editing Titles Available Characters Entering TitlesPress to specify the dividing point Editing TracksDividing a Track into Two Tracks Divide Press repeatedly to select DIVIDE?Track number to which you want to move the specified track Joining Tracks JoinPress repeatedly to select JOIN? Press repeatedly to select MOVE?Example Erasing tune B Erasing a Track EraseErasing All Tracks ALL All tracks, and then pressExample Forming tune A, tune B and tune C into a group Editing Tracks by GroupForming a Group Form GR Press repeatedly to select Form GR?Press repeatedly to select Divide GR? Adding a Track to a Group Entry GRDividing a Group into Two Groups Divide GR Press repeatedly to select Entry GR?Press repeatedly to select Move GR? Joining Groups Join GRMoving a Group Move GR Press repeatedly to select Join GR?Press repeatedly to select Ungr ALL? Canceling a GroupCanceling a specified group Canceling all groups Ungr ALL Press repeatedly to select UNGROUP?Example Erasing group Erasing a Group Erase GRPress repeatedly to select Erase GR? Tracks, and then pressChanging the sleep timer setting Using the TimersSleep Timer Recording TimerActivating the recording timer again Canceling the recording timerPress or to select the sound source you want to play back Playback TimerPress Press or to adjust the playback volume Prepare the sound source you want to play backAuto Standby Canceling the playback timer functionActivating the playback timer again Canceling auto standbyCanceling the CD/MD ejection lock CD/MD Ejection LockWhile holding down , press on the main unit Restrictions on MDs Serial Copy Management System ScmsHigh Speed Copy Management System Hcms Handling CDs/MDs/Cassette Tapes MD message Meaning Possible solution CD message Meaning Possible solutionMD/CD Messages Problem Possible cause Possible solution Reference TroubleshootingMD/CD receiver CA-UXQ1S/ CA-UXQ1W Speaker SP-UXQ1S/SP-UXQ1WMicro component MD system UX-Q1S/UX-Q1W UX-Q1S/UX-Q1W Micro Component MD System

UX-Q1W, CA-UXQ1W, UX-Q1S, SP-UXQ1S, SP-UXQ1W specifications

The JVC LVT1218-002A, CA-UXQ1S, SP-UXQ1W, SP-UXQ1S, and UX-Q1S represent a versatile and modern audio system designed to deliver impressive sound quality and user-friendly features. This combination of components offers an ideal solution for music lovers seeking both performance and convenience in their home audio systems.

One of the standout features of the CA-UXQ1S is its compact size, making it suitable for various living spaces without sacrificing audio performance. It combines a multi-functional CD player, FM/AM tuner, and Bluetooth connectivity, allowing users to enjoy their favorite tracks from multiple sources. The integration of Bluetooth technology enables seamless streaming from smartphones, tablets, and other compatible devices, providing flexibility for users wishing to curate their playlists effortlessly.

The SP-UXQ1W and SP-UXQ1S speakers enhance the audio experience with their dynamic sound reproduction. These speakers are designed to deliver rich bass and clear mid ranges and highs, making them perfect for a range of musical genres, from classical to rock. The speakers are engineered with high-quality materials that ensure durability and optimum sound performance, reflecting JVC's commitment to audio excellence.

The UX-Q1S functions as the central hub of the system, sporting a user-friendly interface that simplifies navigation through various media options. Its sleek design complements modern decor while boasting a powerful output that fills rooms with impactful sound. Users can easily switch between listening to CDs, tuning into radio stations, or connecting via Bluetooth without hassle.

In addition to audio playback, the system supports USB playback, enabling direct access to music stored on flash drives. This feature further broadens the options available to users, accommodating diverse music libraries.

Overall, the JVC LVT1218-002A, CA-UXQ1S, SP-UXQ1W, SP-UXQ1S, and UX-Q1S combine cutting-edge technologies and important characteristics, providing an audio experience that is both user-friendly and highly enjoyable. Ideal for home listening, this system successfully marries style with functionality, placing it firmly in the spotlight for those who appreciate quality sound in a compact, all-in-one design. Whether hosting gatherings or enjoying a quiet evening, the JVC audio system is engineered to meet a variety of audio needs with ease and sophistication.
Top Page Image Contents