JVC CA-UXQ1S Recording Sound to Cassette Tapes, Preventing recorded sound from being erased, Ing

Page 30

Recording Sound to Cassette Tapes

Main unit

Remote control

NOTE

•The sound input level during recording is automati- cally adjusted.

•When you record tracks from a CD or MD, a 4- second blank is inserted between tracks in the recording. You can record tracks with no blank

time. ( page 28)

CAUTION

•It may be unlawful to record or playback copyright material without the consent of the copyright owner.

•Do not use long cassette tapes such as C-120 or C-150. Long cassette tapes are thin and stretch easily, and may become tangled in the inner part of the main unit.

•Since this product is not compatible with TYPE II and TYPE IV cassette tapes, do not use these types of cassette tapes. This product does not meet the specifications for these tapes, so sound is not properly recorded to these types of cas- sette tapes. You cannot obtain proper playback sound.

Preventing recorded sound from being erased

•Write protect tags are attached to a cassette tape for preventing the erasing of recorded sound. They enable you to avoid losing impor- tant recordings because once you snap off the write protect tags, you cannot record to the cas- sette tape or erase recorded material.

•When you want to use the cassette tape for recording again, cover the tag holes with adhe- sive tape.

 

Write protect

Write protect

1

tag for side B

tag for side A

Insert a cassette tape for record-

ing.

•Before inserting the cassette tape, wind the tape past the leader part of the cassette tape.

Magnetic tape

(recordable part) Leader tape (unrecordable part)

2 Press to select the reverse mode.

•Each time you press , the display toggles as follows.

: For one-way recording on either side.

: For one return recording on both sides.

: Pressing automatically starts one return recording on both sides.

3 Select a sound source for recording.

Sound source

 

 

Operation

 

 

 

 

 

 

 

 

 

 

CD

Press

, and then press

 

 

.

 

 

 

 

(The CD is stopped.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MD

Press

, and then press

 

 

.

 

 

 

 

(The MD is stopped.)

 

 

 

 

 

 

 

 

 

 

 

 

Radio broad-

Select the radio station whose broad-

cast

cast you want to record (

page 14).

 

 

 

 

 

 

 

Sound from

Press

 

repeatedly to select AUX,

other equip-

and prepare playback on the other

ment (AUX)

equipment (

page 22).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Press on the main unit.

27

Page 29 Page 31
Image 30
Page 29 Page 31
Contents UX-Q1S Important for Laser Products / 镭射产品的重要说明 Front view Table of Contents Listeners Etiquette Cleaning the Main UnitSuitable Locations for the Main Unit About CDs/CD-Rs/CD-RWsSupplied Accessories Special CautionsPreparation English Remote Control Inserting Batteries into the Remote ControlRemote control operation Set up the AM loop antenna supplied Connecting the AntennasConnecting the AM antenna Connect the antenna cordConnecting the FM antenna Connecting the Speakers Demonstration display function Connecting Other EquipmentConnecting the Power Plug Resuming the demonstration displayDisplaying the clock while using the main unit Setting the ClockAdjusting the clock Basic OperationsAdjusting the Sound Quality Adjusting the VolumeSound Mode Turning On/Off the Main UnitPress On the main unit SoundChanging the Color Patterns For the Display Window CD Tray SoundPress to adjust the intensity of the component color Selecting a Radio Station Setting the AM Tuner SpacingListening to Radio Broadcasts Press to select FM or AMChanging the Display in the Display Window Storing Radio Stations PresetTuning In to a Preset Radio Station Entering radio station namesListening to CDs/MDs Listening to CDsPlace a CD on the CD tray Listening to MDs Insert an MDGroup Playback of an MD Canceling group playbackSpecifying the Track Direct Track Selection Repeat PlaybackRandom Playback Canceling the program playbackCanceling the random playback Erasing the all programmed tracksQuitting the title search Searching TitlesSearching another track or group title Enter the title you want to findPress repeatedly to select the reverse mode Listening to Cassette TapesInsert a cassette tape Listening to Other Equipment Each time you hold down , the display toggles as followsRecording Sound to MDs Recording All Tracks from a CD to an MDProgram Recording from a CD Quitting RecordingRecording Only One Track from a CD Changing the display in the displayInsert an MD for recording LP indicator settingSelect a sound source CD-R/CD-RW recordingExample Display during FM radio broadcast recording FollowsEach time you press Display toggles as Preventing recorded sound from being erased Press to select the reverse modeRecording Sound to Cassette Tapes IngRecording with No Blank Time between Tracks Recording Only One Track from a CD or MDProgram Recording from a CD or MD Changing the display in the display window during recordingGiving Editing Titles Things You Should Know about EditingGiving Editing Titles Entering Titles Available CharactersPress repeatedly to select DIVIDE? Editing TracksDividing a Track into Two Tracks Divide Press to specify the dividing pointPress repeatedly to select MOVE? Joining Tracks JoinPress repeatedly to select JOIN? Track number to which you want to move the specified trackAll tracks, and then press Erasing a Track EraseErasing All Tracks ALL Example Erasing tune BPress repeatedly to select Form GR? Editing Tracks by GroupForming a Group Form GR Example Forming tune A, tune B and tune C into a groupPress repeatedly to select Entry GR? Adding a Track to a Group Entry GRDividing a Group into Two Groups Divide GR Press repeatedly to select Divide GR?Press repeatedly to select Join GR? Joining Groups Join GRMoving a Group Move GR Press repeatedly to select Move GR?Press repeatedly to select UNGROUP? Canceling a GroupCanceling a specified group Canceling all groups Ungr ALL Press repeatedly to select Ungr ALL?Tracks, and then press Erasing a Group Erase GRPress repeatedly to select Erase GR? Example Erasing groupRecording Timer Using the TimersSleep Timer Changing the sleep timer settingCanceling the recording timer Activating the recording timer againPrepare the sound source you want to play back Playback TimerPress Press or to adjust the playback volume Press or to select the sound source you want to play backCanceling auto standby Canceling the playback timer functionActivating the playback timer again Auto StandbyCanceling the CD/MD ejection lock CD/MD Ejection LockWhile holding down , press on the main unit Restrictions on MDs Serial Copy Management System ScmsHigh Speed Copy Management System Hcms Handling CDs/MDs/Cassette Tapes MD message Meaning Possible solution CD message Meaning Possible solutionMD/CD Messages Troubleshooting Problem Possible cause Possible solution ReferenceMD/CD receiver CA-UXQ1S/ CA-UXQ1W Speaker SP-UXQ1S/SP-UXQ1WMicro component MD system UX-Q1S/UX-Q1W UX-Q1S/UX-Q1W Micro Component MD System

UX-Q1W, CA-UXQ1W, UX-Q1S, SP-UXQ1S, SP-UXQ1W specifications

The JVC LVT1218-002A, CA-UXQ1S, SP-UXQ1W, SP-UXQ1S, and UX-Q1S represent a versatile and modern audio system designed to deliver impressive sound quality and user-friendly features. This combination of components offers an ideal solution for music lovers seeking both performance and convenience in their home audio systems.

One of the standout features of the CA-UXQ1S is its compact size, making it suitable for various living spaces without sacrificing audio performance. It combines a multi-functional CD player, FM/AM tuner, and Bluetooth connectivity, allowing users to enjoy their favorite tracks from multiple sources. The integration of Bluetooth technology enables seamless streaming from smartphones, tablets, and other compatible devices, providing flexibility for users wishing to curate their playlists effortlessly.

The SP-UXQ1W and SP-UXQ1S speakers enhance the audio experience with their dynamic sound reproduction. These speakers are designed to deliver rich bass and clear mid ranges and highs, making them perfect for a range of musical genres, from classical to rock. The speakers are engineered with high-quality materials that ensure durability and optimum sound performance, reflecting JVC's commitment to audio excellence.

The UX-Q1S functions as the central hub of the system, sporting a user-friendly interface that simplifies navigation through various media options. Its sleek design complements modern decor while boasting a powerful output that fills rooms with impactful sound. Users can easily switch between listening to CDs, tuning into radio stations, or connecting via Bluetooth without hassle.

In addition to audio playback, the system supports USB playback, enabling direct access to music stored on flash drives. This feature further broadens the options available to users, accommodating diverse music libraries.

Overall, the JVC LVT1218-002A, CA-UXQ1S, SP-UXQ1W, SP-UXQ1S, and UX-Q1S combine cutting-edge technologies and important characteristics, providing an audio experience that is both user-friendly and highly enjoyable. Ideal for home listening, this system successfully marries style with functionality, placing it firmly in the spotlight for those who appreciate quality sound in a compact, all-in-one design. Whether hosting gatherings or enjoying a quiet evening, the JVC audio system is engineered to meet a variety of audio needs with ease and sophistication.
Top Page Image Contents