MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the elliptical crosstrainer regularly. Replace any worn parts immediately.
For smooth | Incline |
operation of | |
the elliptical | Frame |
| |
crosstrainer, |
|
the incline |
|
frame should |
|
be kept clean. |
|
Using a soft |
|
cloth and mild | Wheel |
detergent, | |
clean dust and |
|
other residue |
|
from the incline |
|
frame where the wheels make contact with it. Other parts of the elliptical crosstrainer can also be cleaned in this manner. Never use abrasives or solvents.
LUBRICATING THE INCLINE BRACKET
HOW TO LEVEL THE ELLIPTICAL CROSS- TRAINER
If the elliptical |
|
| |
crosstrainer |
|
| |
does not sit |
|
| |
flat on the |
|
| |
floor, one or |
| Jam | |
both of the |
| ||
Pad | Nut | ||
leveling pads | |||
| |||
|
| ||
should be |
|
| |
adjusted. |
|
| |
First, loosen |
|
| |
the jam nut on |
|
| |
each leveling |
|
| |
pad. Next, |
|
| |
turn the leveling pads as needed until the elliptical | |||
crosstrainer is level. When the leveling pads are prop- erly adjusted, firmly retighten the jam nuts.
PULSE SENSOR TROUBLE-SHOOTING
The incline bracket and the bolt on which it pivots should be regularly lubricat- ed. Apply a small amount of the included lubricant to the bolt and between the bracket and the upright.
| Upright |
Bolt | Incline |
Bracket |
¥Avoid moving your hands while using the pulse sen- sor. Excessive movement may interfere with heart rate readings.
¥Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings.
¥For the most accurate heart rate reading, hold the metal contacts for about 15 seconds.
¥For optimal performance of the pulse sensor, keep the metal contacts clean. The contacts can be cleaned with a soft clothÑnever use alcohol, abrasives, or chemicals.
11