ASSEMBLY
Assembly requires two people. Place all parts of the elliptical crosstrainer in a cleared area and remove the | ||||
packing materials. Do not dispose of the packing materials until assembly is completed. | and your own |
| ||
The following tools are required for assembly: the included allen wrenches | . | |||
phillips screwdriver | adjustable wrench | and a rubber mallet |
| |
1.Note: Make sure that the two 5/16” x 1” Screws (76) are loose.
Tap a 1/2” Axle Cap (39) onto one end of the Incline Motor Axle (14). With the help of a second person, raise the Incline Frame (7). Insert the Incline Motor Axle through one side of the Incline Frame, through a Plastic Spacer (91), through the end of the motor screw, through another Plastic Spacer (91), and through the other side of the Incline Frame.
Tap a 1/2” Axle Cap (39) onto the other end of the Incline Motor Axle (14).
Tighten the two 5/16” x 1” Screws (76).
2.Raise the Upright (3). Slide the 3/8” Washer (94) onto the Patch Bolt (90). Secure the Upright by tight- ening the Patch Bolt (90) into the Base Frame (1).
3.Secure the Cup Holders (87) in the console plate by tapping the Cup Holders into the indicated holes.
1 |
|
| Motor |
|
|
|
|
| |
|
|
| Screw | 39 |
|
|
|
| |
| 76 |
| 91 |
|
39 | 14 | 7 |
| |
|
|
| ||
2 |
|
|
|
|
|
|
| 3 |
|
| 90 | 94 | 1 |
|
|
|
|
| |
3 |
|
| 87 |
|
|
|
|
| |
Console |
|
|
| |
| Plate |
|
|
|
4