Timex W280 quick start Get Started Using Your Cycle Trainer, Charge the Cycle Trainer

Get Started Using Your Cycle Trainer™

Timex Cycle Trainer™ 2.0 bike computer adds a dashboard to your handlebars. Five screens of real-time cycling data provided by GPS, the included heart rate sensor and optional ANT+™ power sensors let you track your performance and finely tune your ride.

This guide contains all you need to know to get started using your Cycle Trainer™ computer including the basic functions of each button and how to configure required settings. You’ll also learn how to record your first ride, and how to create and follow a route.

For a full list of features and in-depth instructions, get the complete User Manual at: www.timex.com/manuals

For Training videos go to: www.youtube.com/timexusa

Charge the Cycle Trainer

Before you use the Cycle Trainer™ computer for the first time, charge the battery for at least 4 hours.

Plug the large end of the USB cable into a powered USB port on your computer, and plug the small end into the port on the back of the device covered by the rubber cap.

A fully charged battery will run for 18 hours in full GPS mode.

4 5