Fostex VF-16 Hint, About save error, To erase the existing recorded data, To eject the disk, Disk

<Note for saving data to more than one disc>

If you save data to more than one disc, we recom- mend to put a number on each disc in the saving order (such as DISC-1, DISC-2, etc.) so that you will easily know the order for inserting discs when load- ing data.

<Note>
You cannot abort the save operation before com-
pleted. Especially during the save operation to more
than one disc, if you happen to press the [EXIT/NO]
key while removing or inserting a disc, you have to
redo the save operation from the beginning with
the first disc.	Flashing
	Flashing

<About save error>
If an error occurs for some reason during the	• To erase the existing (recorded) data
save operation, the error message as below
	Press the [ENTER/YES] key while both "ERASE" and
appears.
	"Sure?" are flashing.
If it appears, press the [EXIT/NO] key.	The display shows the screen below and the VF-
The display returns to the previous screen	16 starts erasing the disc.
before performing the save operation.	As the erase process progresses, the number of
	flashing "*" increases from left to right.

Note that saved data before the error message appears is all invalid.

Flashing

Flashing

<Note>

If the message above appears while saving data to a CD-R disc, you can no longer use the disc.

<Hint 1>
		Increases as the process progresses.
In the description for saving data above, we
assume to use a non-recorded CD-RW disc.	Immediately after completing erasing the disc, the
If you use a recorded disc (including a disc
	display shows the same screen (for selecting a pro-
on which computer data is recorded), also	gram to be saved) which appears after step 4 is
note the following.	performed. Hereafter, perform the same proce-
	dure as described above.
By performing step 4 in the save operation
procedure shown above ("While "SCSI" is	• To eject the disk
flashing, press the [ENTER/YES] key.") when
	Use the [JOG] dial to highlight "Eject" (flashing)
a recorded disc is inserted, the display shows
	and press the [ENTER/YES] key.
a warning message, followed by the confir-
	The disc is ejected while the display shows "Insert
mation screen (where "Sure?" flashes).	Disk!."
With this screen, you can choose whether eras-	By inserting a disc, you can start the save opera-
	tion again from the beginning.
ing the recorded data or ejecting the disc.

5