hour and in meters when speed is measure in kilometers per hour.
10. Altitude ClimbedMaximum
The Altitude Climbed function on your SpeedZone® Pro calculates the total altitude gained during your ride. Descended altitude is not counted. To reset the Altitude Climbed to zero, press and hold the "SET" button for three seconds.
11.Distance Countdown (DIST 
) Your SpeedZone® Pro is equipped with Distance Countdown feature. This allows you to set an alarm when the selected mileage is reached. To enter the Distance Countdown mode, press the "MODE" button until "DIST 
" appears on the
22
screen. To set the Distance Countdown, hold the "SET" button for three seconds. The hour digit will begin flashing. Press the "MODE" Button until the desired number appears. (Hold down the "Mode" button to scroll quickly) Press the "SET" button once to set this number and advance to minutes. Repeat this process until minutes and seconds are set to the desired settings. Press the "SET" button to exit programming mode. Once the time interval timer is programmed, press the "TOP" button to stop and start the Distance Countdown. Note: The shortest dis- tance that can be set is .01 miles/km.
COMPUTER FUNCTIONS
Speedometer (SPEED)-
Your current speed is always shown by the long needle on the LCD screen. Each needle represents one M/h when miles is selected and two Km/h when kilometers is selected. The speed is also shown on the Digital Display Area up to 99.9 M/h (99.9 Km/h) with a resolution of 0.1 M/h (0.1 Km/h)
Average Speed (AVSPD)-
Average Speed is always shown by the flashing long needle on the LCD screen. The average speed is based upon the ATM time. The resolution of the average speed data on the Digital Display Area is shown in 0.1M/h or Km/h increments. (See figure 16) The
Km/h
FIGURE 16. AVERAGE SPEED SCREEN
Average Speed is also shown on the Digital Display Area up to 99.9 M/h (99.9 Km/h) with a resolution of 0.1 M/h (0.1 Km/h)
Maximum Speed (MXSPD)-
The maximum speed is shown by a short
23