FIGURE 7. | FIGURE 8. | FIGURE 9. |
SECURING HARDWARE | FASTEN MAGNET | CLEARANCE BETWEEN |
| TO CRANK ARM | MAGNET AND SENSOR |
"SPEEDID". The
of your bicycle backward to activate the cadence transmitter. The SpeedZone Pro will automatically detect and store the transmitter code. Press "SET" to resume operation. These codes will be stored until the battery is depleted or removed.
MOUNTING CADENCE
HARDWARE
until the "wheel option" indicator flashes while spinning the wheel.
IMPORTANT INSTALLATION NOTE: Your SpeedZone® Pro computer uses an advanced wireless digital transmis- sion system. In order to operate cor- rectly, it will need to "learn" the codes from the speed and cadence transmit- ters. There is a simple calibration
8
process that must be done only when you first install your SpeedZone® Pro and any time you replace the battery in the transmitter. (This should not be necessary when replacing the only computer batteries) Upon starting your SpeedZone® Pro, press the "MODE" button until "SPEED" is dis- played. Then, press the "TOP" button once. The Display will now read
tion. To calibrate the Cadence func- tion, press the "MODE" button until "CAD" is displayed. Then, press the "TOP" button once. The Display will now read "CADID". The
In order to use the cadence option you must install the cadence transmitter provided with your SpeedZone® Pro. This transmitter is marked with a CRANK icon. The transmitter should be fastened to the left chain stay of your bicycle. Secure the transmitter mount to the chain stay using the pro- vided
9