Soehnle 3030 manual Installation and commissioning, Operating concept, keys and display symbols

Page 4

English

1.3 Installation and commissioning

Before connecting up the appliance, make sure that the power supply complies with the specifications on the appliance's nameplate and the power plug version conforms to local regulations.

Place the connected scales on a level and stable surface. Select an installation site where the appliance is protected from shocks, vibrations, intense heat or cold, draughts, chemicals and moisture.

The appliance may only be opened by trained service technicians. Before working on the appliance, unplug the power supply. After power-on, the measured values stabilise after a warm-up period of 30 minutes.

Further information on power-on is provided in the 3030 Operating Manual on the CD.

Connections

Power supply

Ground (GND)

Scale 3

Scale 2

Scale 1

	I/O-Port
Ports 1 + 2	Pressure compensation mem
	Anybus-Port

1.4 Operating concept, keys and display symbols

The setting options are divided into two function ranges:

Setting mode

Here you can enter user-definable settings on the appliance to adapt the weighing system to your requirements. For a description, refer to Chapter 2 Setting Mode in the manual.

Program settings

Weighing + taring Totalising + batching Counting Checking Classifying Recipes

Weight conversion Weighing vehicles I/O port programming Percentage weighing

Terminal

Version

Display

Keypad

Date/time Organisation data User password Reset terminal

Scale	IT
Scale parameter	Data transfer
	Alibi memory
	Port 1
	Port 2
	Print view
	I/O port settings
	Fieldbus
	Barcode

Service

Only for service engineers.

4

Image 4

Contents 3030 Content EnglishTechnical data Description of the applianceInstallation and commissioning Operating concept, keys and display symbolsProgramming mode CancelFunction keys Navigation with the function keysInput and control keys DisplaySymbols in the display Symbol bar Information pane Symbol for standstillBasic functions Power on/offSelecting a program X10 display ZeroingGross display Organisation data identifiers Content inputDescription input Switching between scales Manual switchoverAutomatic switchover UnitInput procedure Numerical boxes Alphanumeric inputTypes of input box Activating input boxesApplication programs Selecting an application programFunction keys Weighing and taringDisplay view Manual taring Weighing without taringTaring by manual tare input Multiplicative tare Additive tareProvisional tare Automatic taringError message when taring Display options with the Info key3rd level setting functions Totalising and batchingTotal memory with several connected scales 1st level totalising functionsTaring Operating the totalising functionsF6 Plus F5 ManualClip off factor when totalising Selection options for total displayAutomatic totalising Assigning and clearing the consecutive numberPrint keys Piece counterDisplaying the current totals Displaying individual pieces 4th level setting functions Counting1st level counting functions 2nd level checking functionsCounting display view Counting functionFunction key F1 Ref Function key F2 Ref VariabNew reference weight Displaying the reference weightWeight display during count operation Fixed value memory for reference weightsQuantity check Calling the list of reference weights for countingTotalising different countable parts Switching points for quantity check Quantity check special characterDisplaying the setpoint and tolerance Data record/Printout within or outside the toleranceCounting with several weighing platforms Checking 1st level checking functionsCheck display view Checking functionsType in setpoints Check special charactersTerminating the checking function New setpointFixed value memory for setpoints Calling the list of fixed value check weights for checking Switching points for checkingFurther information English English Soehnle Professional GmbH & Co. KG Scales, System Solutions And Special DevelopmentsSoehnleDE-71522ProfessionalBacknangGmbH & Co. KG

Related manuals

Manual 36 pages 21.97 Kb