1 Select the “DUAL” on the |
|
| MODE |
| |
| SINGLE DUAL | ||||
| MODE SW. |
|
|
|
|
2 | Choose the Effect Type you |
|
| TYPE |
|
|
| DLY+REV |
| ||
| want to set for the Effect 1 and |
| VOCAL |
| DELAY |
| Effect 2. See page 5 for the |
| PLATE |
| MISC |
|
| ROOM |
| CHO | |
| variety of Effect Types. |
|
| ||
|
| S.HALL |
| PITCH | |
|
|
| L.HALL |
| FLANGE |
3 Set the variation on the Effect |
| VARIATION | |||
|
| 6 |
| ||
| Type that you have chosen. |
| 5 |
| 7 |
|
|
| 4 |
| 8 |
|
|
| 3 |
| 9 |
|
|
| 2 |
| 10 |
|
|
| 1 |
| 11 |
4 | Adjust the parameters for | ADJUST | ADJUST | ||
PARAM.1 | PARAM.2 | ||||
| Effect 1 and Effect 2. |
|
|
|
|
| Adjust the mixing balance of |
| MIX |
| MIX |
|
| PARAM.3 | |||
5 the Dry sound and Effect sound | DRY+EFF | DRY+EFF | |||
|
|
|
| ||
| to get the ratio you require from |
|
|
|
|
| the OUTPUT 1 and OUTPUT |
|
|
|
|
| 2 jack sockets. | DRY | EFF | DRY | EFF |
|
|
| _ | + | |
|
|
|
|
| |
<Caution on Effect Processing>
The PEAK LED indicator on the front panel is designed so that it will illuminate when the Input signal reaches 6dB below the distortion level. First, adjust the Input level using the control knob and watch the LED indicator. The best level setting makes the PEAK LED illuminate occasionally. In the case of the sound being distorted in the internal DSP, in spite of no indications on the PEAK LED, this is due to the rise of the entire signal level due to a variety of Effect sounds being used. If this happens, reduce the Input level with the control knob so that the Output sound is not distorted.
<Caution on changing SW position>
The Output signal will disappear momentarily when you change the position of the MODE SW, EFFECT TYPE SW and VARIATION SW. This is not a fault. It is due to the DE- 1 resetting its internal DSP.
<Caution when using the ADJUST knob and MIX knob>
Some clicking noises may be heard when you control the ADJUST knob and MIX knob, with certain types and sounds of the Effect.
The ADJUST knob may not give you functions even if you try to increase the parameter when the default setting is already at the maximum. Similarly, you cannot decrease it further if the default parameter setting is already at the minimum position.
How to use the Single Mode
Here, we discuss the practical operation of the Single Mode. The Single Mode has the features listed below.
[Outstanding features of the Single Mode]
1.You can use it as a high quality single channel Effect Processor.
2.It provides stereo Inputs and Outputs.
3.It has three ADJUST knobs as PARAM. 1~3. With these, you can alter three individual parameter settings in more detail, on top of the typical presets designed for each Effect.
4.It offers a higher density reverb than the Dual Mode.
5.The independent channel algorithm offers completely separate Output signals for each channel (L,R).
This is an example of the “Single Mode” used in a live performance. Connect the stereo output of the Keyboard directly into the
EFFECT 1 |
|
|
|
|
|
|
|
|
|
|
|
| EFFECT 2 | |
TYPE |
|
| VARIATION | ADJUST | MIX |
|
|
| TYPE |
| VARIATION | ADJUST |
| MIX |
|
|
|
| PARAM.1 |
|
|
|
|
|
|
| PARAM.2 | PARAM.3 | |
DLY+REV |
|
| 6 | DRY+EFF |
|
|
| DLY+REV |
| 6 |
| DRY+EFF | ||
VOCAL | DELAY | 5 | 7 |
|
|
|
| VOCAL | DELAY | 5 | 7 |
|
|
|
PLATE | MISC | 4 | 8 |
|
|
|
| PLATE | MISC | 4 | 8 |
|
|
|
ROOM | CHO | 3 | 9 |
|
| MODE | ROOM | CHO | 3 | 9 |
|
|
| |
S.HALL | PITCH | 2 | 10 |
|
| SINGLE | DUAL | S.HALL | PITCH | 2 | 10 |
|
|
|
L.HALL | FLANGE | 1 | 11 | DRY | EFF |
|
| L.HALL | FLANGE | 1 | 11 |
| DRY | EFF |
|
|
|
|
|
|
|
|
|
|
|
|
| _ | + |
|
|
| PEAK |
|
|
|
|
|
|
| PEAK |
|
| POWER |
17