Sega 999-0886-01 owner manual Volume Setting

7 - 8 VOLUME SETTING

When VOLUME SETTING is selected, the following appears on the screen and each operating unit’s

Volume can be set.

If the operability is unsatisfactory, or when the Volume is adjusted or replaced, set the Volume in this mode.

The 3 kinds of Volume Settings for HANDLE, ACCEL, and BRAKE are to be set. The Max. value, Min.

value for each and the HANDLE’S CENTER value are to be set as applicable.

VOLUME SETTING

HANDLE SETTING AD0:78H

CENTER 78H

LEFT MAX 1aH <----> a4H RIGHT MAX

ACCEL SETTING AD1:30H

MIN 31H <----> c0H MAX

BRAKE SETTING AD2:38H

MIN 39H <--->bcH MAX

>EXIT

SELECT WITH SERVICE BUTTON

PRESS TEST BUTTON TO EXIT

FIG. 7.8 VOLUME SETTING

1Press the SERVICE button to select the Volume value to be changed.

2Press the TEST button to cause the characters of the selected Volume value to turn red.

3Input the value in the manner corresponding to the selected item.

4Press the SERVICE buton to select EXIT, and press the TEST button to return to the MENU mode. At the same time the VOLUME SETTING is finished, the input values are stored as the Max. and Min. values.

25www.seuservice.com