14. PERIODIC INSPECTION TABLE
The items listed below require periodic check and maintenance to retain the performance of this machine and ensure safe operation.
Be sure to check once a year to see if Power Cords are damaged, the plug is securley inserted, dust is accumulated between the Socket Outlet and the Power Plug, etc. Using the product with dust as is accumulated can cause a fire or electrical shock.
Periodically once a year, request the place of contact herin stated or the Distributer, etc. where the product was purchased from, as regards to the interior cleaning. Using the product with dust as is accumulated in the interior without cleaning can cause a fire or short circuit accident. Note that cleaning the interior parts can be performed on a
|
| ITEM | INTERVAL | REFERENCE |
CABINET | Check Adjusters’ contact with surface. | Daily | 4 | |
HANDLE MECHA | Check lamp. | Monthly | 8 | |
|
| Check VOLUME VALUE. | Monthly | 8 |
|
| Check ADJUST GEAR engagement. | 9 | |
|
|
|
|
|
|
| Greasing of GEAR. | 9 | |
ACCEL. & BRAKE | Check VOLUME value. | Monthly | 10 | |
|
| Check ADJUST GEAR engagement | 10 | |
|
|
|
|
|
|
| Gear and Spring portion greasing. | 10 | |
SHIFT LEVER | Check Switches. | Monthly | 9 | |
COIN CHUTE TOWER | Check COIN SW. | Monthly | 4 | |
|
| Coin insertion test. | Monthly | 11 |
|
| Cleaning of COIN SELECTOR. | 11 | |
MONITOR | Check adjustments. | Monthly or when moving | 12 | |
|
| Cleaning of CRT surfaces. | Weekly | 12 |
SEAT | Antistatic measures. | Next page | ||
|
| Applying grease to Seat Rail. |
| |
GAME BD | MEMORY TEST. | Monthly | 7 | |
|
| Check Settings. | Monthly | 7 |
CABINET SURFACES | Cleaning | As occasion arises | Next page | |
INTERIOR | Cleaning | Annually | See Above | |
POWER SUPPLY PLUG | Inspection and cleaning. |
|
| |
|
|
|
|
|
CLEANING CABINET SURFACES
If the cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid diluted with water and then
squezzed dry. Do not use thinner, benzine, alcohol or chemical dustcloth as these can damage Cabinet surfaces.
SEAT (Greasing to Seat Rail Portion)
Move the Seat to the rearmost portion and apply spray greasing to the
portion shown at the right once every 3 months by using NOK KLUBER
L60 or GREASE MATE SEGA PART No.
seat a few times forward and backward so as to allow the grease to be
applied all over uniformly. Be sure to wipe grease which attaches to the
surfaces of the PROTECT RUBBER on the seat Rail, or any excess grease.
www.seuservice.com46