8.
At corner locations 1, 2, and 3 install the display pole (11) to the mounting pole stub. If required, secure the display pole (11), slide the display wedge (12) into position as shown. Tighten the set screw (13) to lock the display pole (11) in place. Use the second wedge only if necessary to tighten the fit.
11
12
13
At corner location 4 slide the display pole (14) (3 1/2” diameter) over the mounting pole stubs.
9.
14
P/N 211543B | 06/03 | 6 |