ELEVATOR ASSEMBLY - Corner Locations 1 and 3
10. | Install pole mount bracket (49) with |
| carriage bolts (16) as shown. |
| Tighten flange nuts (8) completely. |
|
|
16
11 
49
8
Attach spacers (51, 52) to pole mount bracket
11. (49) with bolts (24), washers (30), and nuts (17) as shown. IMPORTANT! Tighten until washers (30) no longer move.
30
17
49
52 | 30 |
24
51
12. | Attach covers (54) onto pole mount bracket (49) | 13. | Apply logo and height indicator labels (48) to |
| with carriage bolt (31) and nut (8) as shown. |
| adjustment rod (47) as shown. |
|
| Attach handle parts (45, 46) to adjustment rod (47) | |
| IMPORTANT! Loop end of pin lanyard (57) |
| |
|
| with screw (26), carriage bolts (22), and flange | |
| over carriage bolt (31) during this assembly. |
| nuts (8) as shown. NOTE: Holes in adjustment rod |
| NOTE: Assemble lanyard (57) to locking pin (55) |
| allow for either rear access or side access. |
| as shown. |
| |
|
|
| |
|
|
| |
|
|
|
|
54
8 
49
57
54
44
55
57
55
47
48
| 45 |
8 | 46 |
|
26 |
25
7 | 06/03 P/N 211543B |