English |
CAUTION: Make all connections before plugging the Unit into an AC power outlet.
Connecting the Speakers
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the System.
1. | Open each of the terminals and insert the speaker wires firmly, then close the terminals. |
2. | Connect the red (+) and black |
| Connect the red (+) and black |
Right speaker (rear side) | Left speaker (rear side) |
RIGHT LEFT
Black
1 | 2 | 3 |
CAUTION: A TV may display irregular colors if located near the speakers. If this happens, set the speak- ers away from the TV.
Connecting Auxiliary Equipment
Turntable (or MD player)
To listen to this source, press the AUX button.
R L
Signal cord (optional)
Turntable (with
AUX
Connecting the AC Power Cord
Firmly insert the supplied AC power cord into the AC inlet on the back of the System.
AC IN
Power cord
CAUTIONS:
•ONLY USE THE JVC POWER CORD PROVIDED WITH THIS UNIT TO AVOID MALFUNCTION OR DAMAGE TO THE UNIT.
•BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE UNIT IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!
4