JVC UX-T300R manual Using the Cassette Deck Listening to a Tape, Regular Play, Reverse Mode

■Using the Cassette Deck

■(Listening to a Tape)

¢

7

4

TAPE 2 3

		0 (EJECT)
		Tape Direction indicator
TAPE 2 3	4 REW	Reverse Mode indicator
REVERSE	¢ FF
MODE	7

English

	When the System is in use, the display shows other items as well.
	For simplicity, we show here only the items described in this section.
The Cassette Deck allows you to play and record audio tapes.	■
	5. If you need to change the playback direc-
■ With Automatic Tape Detection, you can listen to type I, II or	tion, press the TAPE ` again.
IV tapes without having to change any settings.
	The opposite side Tape Direction indicator lights up and the
	tape playback direction changes.
The use of tapes longer than 120 minutes is not recommended,
	To stop playing, press the ebutton.
since characteristic deterioration may occur and these tapes eas-	To remove the tape, stop the tape, and press the 0 (EJECT) but-
ily jam in the pinch-rollers and the capstans.	ton.
	To Fast-Forward And Rewind A Tape
One Touch Play ——————————
By pressing the TAPE ` button on the Unit or the Remote Control,	■ Press the ¢ (fast-forward) button on the Unit or the Remote

the Unit will come on, “TAPE” appears in the display, and if a tape	Control to fast-forward the tape.
	■ Press the 4(rewind) button on the Unit or the Remote Control
is in the deck, it will start to play. If no tape is loaded, the Unit will
	to rewind the tape.
come on and wait for you to insert a tape, or select another function.
	• The Cassette Deck automatically stops when the tape reach-
	es its end.

Regular Play

When the power is already on, you can use this basic procedure:

■1. Press the 0 (EJECT) button.

■2. When the cassette holder opens, put the cassette in, with the exposed part of the tape down, toward the base of the System.

•If the cassette holder does not open, turn the Unit off, then back on and press the 0 (EJECT) button again.

■3. Close the holder gently until it clicks. ■4. Press the TAPE ` button.

The tape is played in the direction shown by the Tape Direction indicator.

Reverse Mode

You can set a tape to play just one side, both sides in succession, or both sides continuously.

Press the REVERSE MODE button on the Re- mote Control.

The indicator changes with each press of the button as shown.

= === (back to the beginning)

: The Cassette Deck automatically stops after playing one side of the tape.

: The Cassette Deck automatically stops after playing both sides of the tape.

: The Cassette Deck continues to play both sides of the tape until the e button is pressed.

13